475334

Mitsubishi WD-73835 Manual

60
Zoom out
Zoom in
Previous page
1/94
Next page
60 6. NetCommand IR Control (736 and 835 Series TVs)
Audio Switching Setup 1: Automatic A/V Receiver
Switching to the TV Audio Input
Most devices are set up to use the TV’s audio output like
the VCR in this example; analog audio from the device is
sent through the TV to the A/V receiver’s TV audio input.
Use this setup for:
Sources providing only analog stereo output, •
such as a VCR.
Audio from •
ANT 1
and
ANT 2
Under
1.
Learn, highlight Input1.
In this example, the IR code for the A/V receiver’s
TV Audio
input will be “learned” as Input 1.
Press
2.
ENTER
on the TV’s remote control.
While the text
3.
Input1 is flashing, press and hold the
TV INPUT
key on the A/V receiver’s remote control.
When a check appears next to
4.
Input 1, release the
TV INPUT
key.
If the text stops flashing before the check mark •
appears, repeat this step.
To erase the IR code just “learned,” press •
CANCEL
while the name is highlighted.
Press
5.
once to highlight TV Audio (TV audio
output) in the Assign Input1 column. The triangular
marker is always next to the assigned sound source.
Press
6.
EXIT
if finished or continue with setup for
another TV audio source.
Completed NetCommand setup described for
controlling A/V receiver switching to the A/V receiver’s
audio input from the TV’s
AUDIO OUTPUT.
IMPORTANT
All audio from what you are watching on the
TV is always available from both the TV’s AVR
AUDIO OUTPUT and DIGITAL AUDIO OUTPUT
jacks.
To use the digital surround sound capabilities
of your A/V receiver however, you must connect
your DVD player, satellite receiver, or cable box
directly to the A/V receiver, as surround sound
may not be available from the TV’s audio output.
Before You Begin
Connect your A/V devices to the TV and connect
1.
your A/V receiver to the audio outputs on the TV
and the DVD player. See chapter 3, “TV Connec-
tions,” for suggestions. Important: To use Setup
1, you must connect the A/V receiver to the TV’s
audio output; i.e., the TV’s
AVR AUDIO OUTPUT
or
DIGITAL AUDIO OUTPUT
jack.
Position NetCommand IR emitters as described in
2.
“IR Emitter Placement,” page 53.
Open the
3.
Inputs > AV Receiver menu.
Note: The terms Input1–Input5 used in the AV Re-
ceiver menu are arbitrary names used by the TV
to uniquely identify A/V receiver inputs.
A
2
3
4
AV Receiver menu to set up audio switching
A
T he Learn column lists “learnable” input keys on
the A/V receiver’s remote control.
B
A check mark next to a key name indicates it has
been “learned” by NetCommand.
C
Input1 through Input5 are arbitrary names the
TV uses to uniquely identify A/V receiver inputs.
D
After “learning” IR codes for A/V receiver inputs,
use the Assign Input column to identify the device
connected to the TV and the associated A/V
receiver input.
For the given example:
Connect the TV’s audio output to the A/V receiver’s 1.
TV audio input.
Using this screen, “learn” the IR code for the A/V 2.
receiver’s TV audio input as Input1 (item 3 above).
In the 3. Assign Input1 column (item 4 above), assign
the name TV Audio (the default) to the A/V receiver
IR code previously learned as Input1.
Connect the DVD player’s audio output to the A/V 4.
receiver’s DVD input.
Using this screen, “learn” the IR code for the A/V 5.
receiver’s DVD audio input as Input2.
In the 6. Assign Input2 column, assign the name DVD
to the A/V receiver IR code previously learned as
Input2 in this screen.
Setting Up NetCommand Control of an A/V Receiver, continued
… 60 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-73835 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-73835 in the language / languages: English as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info