475334

Mitsubishi WD-73835 Manual

14
Zoom out
Zoom in
Previous page
1/94
Next page
14 2. TV Setup
Setup Procedure
Setup Procedure for TV Inputs
Power on the TV.
1.
Connect your devices to the TV, making note
2.
of which TV input is used for each device. See
chapter 3, “TV Connections.”
Note: If you wish to use an HDMI device’s CEC capa-
bilities, follow the steps in Appendix E
.
First select a
device type.
Next perform
IR “learning” if
available.
Sample Auto Input Sensing screen.
When the TV detects a new connection, the
3.
Auto
Sensing screen for the connection type will display.
Select the device type if required. See box at right.
Important Note for NetCommand IR Users (736
or 835 Series TV)
Be sure to select the correct device type here.
Although you can change the device type later in the
Inputs > Name menu, any “learned” NetCommand
IR codes will be erased when you make the change.
736 or 835 Series TV.
4.
You can perform NetCom-
mand IR “learning” after selecting the device type
or at a later time when convenient. To perform
now, highlight the Learn icon and press
ENTER
. See
“Initial NetCommand Setup for Most Devices,” page
54 or “Setting Up NetCommand Control of an A/V
Receiver,” page 58.
Press
5.
EXIT
to close the Auto Sensing screen. The
TV will then display the Auto Sensing screen for
the next connection it finds.
After completing Auto Input/Auto Output Sensing,
6.
you may wish to set up or change control of your
equipment using one of the home-theater control
methods described in this Owner’s Guide. See
“About Home-Theater Control Systems” on page
16.
Setting Up TV Inputs, continued
Tips on Auto Sensing and Changing
Connected Devices
Choose a different name for each input.•
Antenna inputs (• ANT 1/ANT 2) are never detected,
although you can turn off unused antenna inputs in the
Inputs > Name menu.
You can change the device type displayed in the • Input
Selection menu by using the Inputs > Name menu (page
48). Any “learned” NetCommand IR codes will be erased,
however.
Changing Devices on an HDMI Input
Disconnect the HDMI device.
1.
Delete the HDMI input in the
2.
Inputs > Name menu.
See page 48.
Connect the new device and the
3.
Auto Input
Sensing screen will display. 736 or 835 Series
TV: If you want the device under NetCommand IR
control, perform NetCommand IR “learning” for the
new device.
Disconnecting an Analog A/V Receiver
When you disconnect an analog A/V receiver, change
the Speakers setting to TV to hear sound from the TV
speakers. Change the setting using the remote con-
trol’s
AUDIO
key or the AV > Audio > Speakers menu.
Auto Input/Auto Output Sensing Screens
See below for how different connections are handled
by Auto Input/Auto Output Sensing.
Most Device Types.• Select the device type from
the on-screen list. The device type you select here
will appear as an icon in the Input Selection menu.
Press to move through the device list to
highlight the device type connected to the input.
Some device types also display a sub-menu of
names—useful if using more than one of the same
device. See the sample Auto Input Sensing
screen shown.
A/V Receiver•
The TV detects audio connections on the -
DIGITAL AUDIO OUTPUT jack and the right (red)
AVR AUDIO OUTPUT jack.
For an HDMI connection, select - AVR from
the list of device types if the A/V receiver is
not recognized automatically.
HDMI Devices Compatible with the TV’s •
NetCommand for HDMI Feature.
Compatible
CEC-enabled HDMI devices are often recognized
automatically by the TV. After connecting the
device, you may briefly see the standard Auto
Input Sensing screen before the TV recognizes
the device type. See
Appendix E
.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-73835 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-73835 in the language / languages: English as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info