475282
117
Zoom out
Zoom in
Previous page
1/128
Next page
Appendices 117
Picture
Symptom Remarks
1. PIP does not display a picture.
• MakesuretheV-Chiplockisoff.
• NotallinputscanbedisplayedasaPIP.
2. CableCARD channel is not shown as PIP image
when CableCARD channel is the main image.
Due to the limitations of unidirectional CableCARD service, only one
scrambled CableCARD channel can be tuned, viewed, or recorded at a
time.
3. There is a large black or gray rectangle on the
screen.
The TVs analog closed captioning has been set to “text” mode in the
Captions menu. Turn off because there is no text information being
broadcast.
4. You cannot see a picture when playing a VHS
tape.
• DisplaytheDeviceSelectionmenuandselectthecorrectVCR.
• CheckyourVCR’sowner’sguideforfurthertroubleshooting.
5. When viewing a stopped VCR, white lines are
rolling on the screen.
• TurnoffvideomutefortheVCR.
• Beginplayingthetape.
• ChangetheVCRinputtotheantennainput.
6. Screen is black when trying to view digital
channels or IEEE 1394 device.
The PerfectColor™ color balance has been incorrectly set. Press VIDEO
repeatedly until you see the PerfectColor option and press ENTER.
7. A program recorded on your widescreen TV is
distorted when played on a 4:3 TV.
TV was set to Anamorphic when program was recorded. Record
programs in Cropped mode if playing back on a 4:3 TV. Open the
Record menu and select Cropped before making such a recording.
8. Cannot see a picture from a DV Camcorder. DV formatting was not detected during automatic discovery, so you must
specify it manually. Open the Edit NetCommand screen, select Change,
then select the camcorder, Add, and in the Name for 1394 Device
screen, check mark the DV box.
9. DVCR analog/digital problems. If the tape is currently playing but no picture displays, there may be a
mismatch of the media with the display. Press DEVICE to display the
Device Selection menu. Press ENTER for the DVCR device. If digital is
selected, try analog, or if analog is selected, try digital.
Indicators
Symptom Remarks
1. Lamp indicator light is a constant red. Turn the TV off for at least 2 minutes. Turn back on. If light is still red,
the lamp has failed. Replace it. See Appendix G for lamp replacement
information.
2. Lamp indicator light is a constant yellow. Lamp may fail soon. Purchase a new lamp. See Appendix G for lamp
replacement information.
3. Lamp indicator light is a flashing yellow. Lamp cover door is open or lamp cartridge is not secure. See Appendix
G for lamp replacement information.
4. Status indicator light is a constant yellow. Room temperature has exceeded proper levels. Cool the room.
5. Status indicator light is a constant/flashing red. Service is required. Contact your dealer or a Mitsubishi Authorized
Service Center to arrange for a service evaluation. Listings of Mitsubishi
Authorized Service locations can be obtained from our web site, www.
mitsubishi-tv.com or by calling 1-800-332-2119.
Appendix J: Troubleshooting, continued
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-73827 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-73827 in the language / languages: English as an attachment in your email.

The manual is 7,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info