Manual Mitsubishi WD-73827 (page 60 of 128) (English)

475282

Zoom out

Zoom in

1/128

60 Chapter 4. Netcommand Functions

Direct VCR Recording from an

Antenna or Cable Source

When your VCR is the current device, REC (record) on

the TV’s remote control functions the same as the record

button on the VCR’s remote control or front panel.

To record directly from antenna or cable:

• Method1

1. Press DEVICE on the TV’s remote to display the

Device Selection menu. Highlight the traditional

VCR and press POWER to turn on the VCR. If

necessary, press GUIDE to select the input the

VCR is on, such as Antenna input (or line input).

2. Press ENTER to switch the TV to the VCR.

3. Select the correct channel for recording on the

VCR and then press REC to start recording. You

will need to manually stop the recording at the

end of the program

• Method2

With the VCR as the current recording device, press

the DEVICE MENU button to display the VCR’s menu,

in which you can schedule a delayed recording

directly from antenna or cable.

To record from ANT-1, ANT-2 or other devices, see

NetCommand Controlled Recordings or refer to the TV

Guide On Screen® User’s Manual.

Copy-Protected Material

When attempting to record copy-protected material, the

Record functions of the NetCommand and IEEE 1394

systems may be prevented or stopped. If you have a

recording that is tagged “Record Once,” NetCommand

will change the tag to “Record No More.”

Restrictions for Traditional VCRs

with NetCommand- and TV Guide On

Screen-Controlled Recording

• YourVCRshouldbeconnecteddirectlytothe

RECORD OUTPUT AUDIO and VIDEO outputs.

• TheVCRmustbesetmanuallyto“LineInput.”

Display the Device Selection menu, highlight the VCR

and press GUIDE to change VCR inputs.

• IfNetCommandissetup,theTVcanselectchannels

on compatible cable boxes for recordings. Leave the

cable box turned on.

• Ifthesourcedeviceorrecordingdevicedoesnot

have separate power On and Off features, then leave

that device powered On.

NetCommand®-Controlled Recordings, continued

Using TV Disc and A/V Discs

TV Disc and A/V Disc Search by Time

NetCommand is able to search to a specific time in a

recording on TV Disc or an IEEE 1394 A/V Disc.

1. Start the desired track’s playback on the A/V disc.

2. Use the number buttons to enter the time code

position of hours followed by minutes. For example,

to enter one hour and twenty-two minutes (1:22) into

the track, enter 1, 2, 2.

3. Press ENTER to skip to the time code position.

4. To cancel the request or to start over, press CANCEL

instead of ENTER.

TV Disc and A/V Disc Track List Screen

Figure 10

When viewing TV Disc or an A/V Disc, press GUIDE to

display its Track List. Tracks are listed in date and time

order and vary in size. Press ADJUST or to navigate

through the Track List. To play a track, select it on the

list, then press ENTER. Press INFO to see details for the

highlighted track. To change pages, press CH or . To

delete a track, select it on the list and press CANCEL.

Figure 10. Track List screen

IMPORTANT

The TV Disc is not intended for permanent

storage of recordings. Mitsubishi

recommends you transfer important

recordings to an external device such as a

VCR. If the TV Disc requires replacement or

repair, recordings stored on TV Disc will be

lost and cannot be recovered. Mitsubishi is

not liable for lost recordings.

• Youcannotrecordfromsourcedevicesconnected

to the TV Component inputs or HDMI 1 or 2

connections.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-73827 in the language / languages: English as an attachment in your email.

The manual is 7,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mitsubishi WD-73827 Manual

Product: