475269
7
Zoom out
Zoom in
Previous page
1/40
Next page
1. Setup and Operation 7
For assistance call 1(800) 332-2119
TV Controls, continued
TV Control Panel
Buttons on the control panel duplicate some keys on
the remote control.
Refer to lower labels when using TV menus or after
activating a special function.
Refer to upper labels when no TV menus are dis-
played.
SYSTEM RESET. If the TV does not respond to the
remote control, control-panel buttons, or will not
power on/off, press and hold the
POWER
button on
the control panel for ten seconds.
The STATUS Indicator
Key Off Steady On
Slow Blinking Fast Blinking
LED Color TV Condition
None
TV is powered off. Normal operation.
Green
TV is powered on. Normal operation.
Green
TV powered off, auto-on TV Timer is set.
Normal operation. TV can be turned on at any time.
Green
TV just powered off and lamp is cooling.
Sixty seconds after turning off TV, LED will start to blink. TV can be turned back on before blinking
starts or after blinking stops, but not while the indicator is blinking. Normal operation.
Amber
TV is too hot.
The TV will shut off if it overheats.
Ambient room temperature may be too high. Turn off the TV and let the room temperature drop.
Clear blocked air vents. Ensure at least a four-inch clearance on all sides of the TV.
Amber
Lamp access door is not secure or no lamp installed.
TV will not operate until lamp access door is secured. See Appendix A .
Red
Lamp failure. Replace the lamp. See Appendix A .
Red/
Amber
TV may require service.
Hold power button on front panel for 10 seconds to reset TV.
If LED continues to flash red and amber after reset, turn off the TV and unplug it from the AC
power source. Wait one minute and then plug the set back in.
If LED continues to flash red and amber,
go to www.mitsubishi-tv.com or call 1-800-332-2119 to
receive Authorized Service Center information.
You may be asked to count how many times the LED flashes each color to aid in troubleshooting.
65” or 73” TV: Open
cover to use buttons
on the front panel.
POWER
STATUS
INPUT
Typical
control
panel.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-73638 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-73638 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info