475326
77
Zoom out
Zoom in
Previous page
1/94
Next page
Appendices 77
Turn on the device and allow it to complete the
1.
power-on sequence (boot up).
Connect the device to one of the TV’s HDMI inputs.
2.
When the TV detects the connection, the Auto Input
Sensing screen will appear and provide additional
instructions. You will see one of the following
screens, depending on your equipment.
Figure 2 (TV recognizes the CEC device). • The
TV’s NetCommand HDMI Control is on and the
device’s CEC capability is on. This screen con-
firms the device is CEC compatible by showing
the name provided by CEC.
The screen shown in
figure 3 may display first before figure 2 appears.
Figure 2. TV recognizes the CEC device. The TV’s
NetCommand for HDMI is on and the connected device’s
HDMI Control is also on.
Figure 3 (“power on the device”).• One of these
conditions applies:
The TV’s NetCommand HDMI Control is -
turned on, but HDMI control is turned off in
the menu of the new device.
Action: Enable the device’s CEC capabili-
ties in the devices setup menus. Within a few
minutes you may see the screen in figure 2.
The device has not yet been detected (e.g., -
no power).
Action: Power on the device.
The device does not have CEC compatibility. -
Action: Check the device’s setup menus. If
there is no HDMI control listed, the device
may not be compatible with CEC. Control the
device with its own remote control or use the
TV’s NetCommand IR control.
Figure 3. “Power on the device.” The TV’s NetCommand
HDMI Control is on but either the connected devices
HDMI Control is off or the device is not CEC compatible
Many new HDMI devices have a feature called CEC
(Consumer Electronics Control) or HDMI Control.
Mitsubishi calls this feature NetCommand HDMI Control
or NetCommand for HDMI. HDMI CEC allows one device,
such as the TV, to control other devices, such as an A/V
receiver or disc player. CEC use is optional.
Each manufacturer chooses which CEC functions to support
so it is difficult to predict which devices and features are
compatible with Mitsubishis NetCommand for HDMI. You
may find that CEC functions for a specific device are limited.
To use CEC, you must enable operation in all three
of the following:
The TVs Inputs > NetCommand HDMI Control •
menu.
When off, the TV sends no control signals to CEC
devices. NetCommand HDMI control is off by default.
The TVs Inputs > Name menu.• You can turn
on or off the TV’s control signals to individual
CEC devices. This option operates only when
NetCommand HDMI Control is enabled.
The device setup menus.• Most devices with HDMI
CEC compatibility let you turn it on or off in the device
menus, where it is typically listed as “HDMI Control.
Enabling or Disabling the TVs NetCommand
HDMI Control
Press
1.
MENU
to display the TV Main menu.
Highlight
2.
Inputs using .
Press
3.
and then to select NetCommand HDMI
Control and open the menu shown in figure 1.
Use
4.
to turn NetCommand HDMI Control On or
Off; Off shuts off all NetCommand for HDMI signals.
Figure 1. The TV menu Inputs > NetCommand HDMI
Control lets you set HDMI control either on or off.
Connecting HDMI Devices to the TV
When setting up CEC control:
Enable the TVs NetCommand HDMI control as described •
above. NetCommand for HDMI is off by default.
Connect and set up HDMI devices one at a time.•
First turn on the device and allow the power-on •
sequence (boot up) to complete. Stop any playback,
and then connect the HDMI cable as described next.
Appendix E: NetCommand HDMI Control of CEC Devices
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-65C8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-65C8 in the language / languages: English as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info