475298

Mitsubishi WD-65734 Manual

55
Zoom out
Zoom in
Previous page
1/84
Next page
6. NetCommand 55
• Ifthetextstopsflashingbeforethecheckmark
appears,repeatthisstep.
• ToerasetheIRcodejust“learned,”press
CANCEL
whilethenameishighlighted.
5. Press tohighlightthenameInput1.Youcan
enteracustomnameusingtheletters/numberson
theremotecontrol.Itisbesttoassignnamesto
“learned”inputsthatmatchtheinputnamesdis-
playedontheA/Vreceiver.Forthisexample,enter
thecustomnameTVusingtheseguidelines:
• Toselectacharacter,repeatedlypressa
numberkeyontheremotecontroltocycle
throughthecharactersassociatedwiththekey.
Thefollowingspecialcharactersareavailable
byusingthe
1
and
0
keys:
1: !&blankspace
0:
/*-
• Press
ENTER
tosetthecharacterandmovethe
highlighttothenextcharacter.
• Todeleteacharacter,highlightthecharacter
andpress
CANCEL.
• Tohighlightthefirstcharacter,repeatedlypress
CANCEL
.
6. Press tomovethehighlighttotheAssign
column.
7. Use tohighlightAudioOut(TVaudiooutput).
Thetriangularmarkerisalwaysnexttotheassigned
soundsource.
8. Press
EXIT
iffinishedorcontinuewithsetupfor
anotherTVsource.
Completed NetCommand setup described for
controlling A/V receiver switching to the A/V receiver’s
audio input labelled “TV.”
Setup 2: Automatic A/V Receiver Switching for a
Surround Sound Device
Usethissetuptosenddigitalsurroundsounddirectly
fromadevicetoanA/Vreceiver.
1. UnderLearn/Name,press tohighlight
theareanexttoInput2.
Inthisexample,theIRcodefortheA/Vreceiver’s
DVD Audio
inputwillbe“learned”asInput 2.
2. Press
ENTER
ontheTV’sremotecontrol.
57
BVEJPWJEFP
*ODPNJOH
$PBYJBM
$BCMF
"73FDFJWFS
%7%BVEJP
JOQVU
57BVEJP
JOQVU
%7%1MBZFSXJUI
%JHJUBM4VSSPVOE4PVOE
%7%1MBZFS
XJUI
%JHJUBM
4VSSPVOE
4PVOE
WJEFP
EJHJUBMTVSSPVOETPVOE
Setup 2: A/V receiver audio from a device providing
surround sound directly to the A/V receiver
Completed NetCommand setup described for
controlling A/V receiver switching to an A/V receiver
input labelled “DVD.”
3. WhilethetextInput2isflashing,pressandholdthe
DVD INPUT
keyontheA/V receiver’sremotecontrol.
4. WhenacheckappearsnexttoInput 2,releasethe
DVD INPUT
key.
• Ifthetextstopsflashingbeforethecheckmark
appears,repeatthisstep.
• ToerasetheIRcodejust“learned,”press
CANCEL
whilethenameishighlighted.
Set Up NetCommand Control of an
A/V Receiver, continued
IMPORTANT
All audio from what you are watching on the
TV is always available as an output on both the
TV’s AVR AUDIO OUTPUT and DIGITAL AUDIO
OUT jacks.
To use the digital surround sound capabili-
ties of your A/V receiver however, you must
connect your DVD player, satellite receiver, or
cable box directly to the A/V receiver, as sur-
round sound may not be available from the TV’s
audio output.
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-65734 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-65734 in the language / languages: English as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info