475281

Mitsubishi WD-62927 Manual

118
Zoom out
Zoom in
Previous page
1/128
Next page
118 Appendices
Sound
Symptom Remarks
1. There is no sound even when the volume is
turned up.
• CheckaudiosourceinDeviceMenu.
• ChecktoseeiftheMUTEbuttonison.
• TheTV’s“Listento:”settingmaybesettoSAP.
• Checkthatthe“TVSpeakers”settingisOnintheAudio/Videomenu.
2. The sound does not match the screen
picture.
• NetCommand®issetupincorrectly.
• TheTV’s“Listento:”settingmaybesettoSAP.
• IfusingstereoorA/Vreceiverspeakers,checktheirinputselection.
• IfusingstereoorA/Vreceiver,checkthatAUDIOOUTPUTonTV’sbackpanelis
connected to the A/V receiver.
3. The A/V Receiver is the selected audio
source but there is no sound.
• ChecktoseeiftheA/VReceiverpoweristurnedon.Afterthepoweristurnedon,
redisplay the Device Selection menu and press ENTER to allow NetCommand to
correctly select the A/V Receiver input.
• VerifytheconnectionsandNetCommandsetupfortheA/Vreceiverandthedesired
source device, if any.
From the NetCommand menu, select Review. Check the Review screen to see if the
A/V Receiver inputs and device listed correspond to the physical connections on the
A/V Receiver. If they do not match, either change the physical connections or change
the NetCommand setup. To change the NetCommand setup, make the audio source
the TV speakers and select a source other than the one you want to change. Next
select the Change option on the Edit NetCommand menu to change the A/V receiver
input for the device on the Connection screen.
4. The TV Speaker icon or A/V Receiver icon is
grayed out and not selectable.
Select the Change setting from the Edit NetCommand menu, and then select
the device (for example VCR). Once the Connection screen is displayed,
check if the audio check box is selected for the TV input and/or AVR input.
Recording
Symptom Remarks
1. See on-screen message “TV Disc is full...” Some recording(s) on the Track List need to be deleted. Press DEVICE
to display the Device Selection menu, then select TV Disc. Press
GUIDE to display the track list. Highlight program(s) to delete and press
CANCEL twice to confirm.
2. The REC button is not working, or, on the
Transport menu, the record key is grayed out and
not available.
• Thedevice,suchasaDVDplayer,doesnotsupportrecording.
• RecordingscannotbeinitiatedfromtheTransportmenuwhenusinganIEEE
1394 device. Press REC instead. The Record menu displays allowing setup of a
recording
3. Program to be recorded was correctly selected
from ChannelView, however, incorrect program
was recorded.
The broadcaster supplied program information that was incorrect and/or
was changed after a recording was added to the Record List.
4. Incomplete ChannelView program recorded. Recording device may lack sufficient blank space to make a full
recording.
ChannelView program recording failed.
• ConnectionandcompatibilityissueswithIEEE1394(FireWire®)digitaldevices.
This may include too many Firewire devices in use at one time, or the recording
device not understanding the record command.
• Televisionlostpowerlongenoughtolosecurrentclocktime.
• AnalogVCRpowerwasleftoff.
Appendix J: Troubleshooting, continued
… 118 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-62927 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-62927 in the language / languages: English as an attachment in your email.

The manual is 7,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info