475319

Mitsubishi WD-62628 Manual

76
Zoom out
Zoom in
Previous page
1/124
Next page
76 Chapter 5. TV Menu Operations
V-Chip Lock Menu
V-Chip Lock Menu Overview
Figure 20
The V-Chip Lock menu gives you access to three different
types of TV locks. You must use a pass code to open
this menu to enable/disable the lock options. The three
different types of locks available are:
• V-Chip
Lets you restrict access to programming based on
program-rating signals sent by the broadcaster. You
can also set the time of day for these restrictions to
be in effect.
• Lock by Time
Lets you restrict all TV viewing by time of day.
• Front Button Lock
Lets you disable the controls on the front of the TV.
Use this option if there are small children near the TV
who may be tempted to press the front-panel buttons.
V-Chip Icon
Lock TV by
Time
Front Button
Lock On/Off
Figure 20. V-Chip Lock menu
Setting a Pass Code
You are prompted to enter a pass code whenever you
select V-Chip Lock on the menu or press the V-CHIP key
on the remote control. To set a pass code for the first
time:
1. Do one of the following:
• PressV-CHIPontheremotecontrol.
• PressTVMENU,highlightV-ChipLock,then
press ENTER.
A screen prompting you for a pass code displays.
2. Input a four-digit pass code using the number keys on
the remote control.
• PressCANCELtodeleteanumberandmove
back one space.
• PressMENUorHOMEtoexitwithoutsetting
a pass code.
3. Press ENTER to confirm the pass code just input.
To reset the pass code, see the procedure in Appendix C.
V-Chip Menu
Figure 21
The V-Chip menu allows you to:
• TurntheV-ChipLockonoroff
• ChangethepermittedV-Chipratinglevel
• Setthetimeofdaytoenforceratingrestrictions
The TV comes from the factory with pre-set V-Chip
ratings and with the V-Chip Lock turned off. The preset
ratings are TV-PG (TV rating) and PG (movie rating). If
you turn on the V-Chip, these presets will allow only
programs rated TV-PG/PG or lower. You can turn on
V-Chip from this menu or by using the V-CHIP button on
the remote control. Use the V-Chip menu to change the
permitted rating levels.
After changing channels or devices, there may be a delay
of up to five seconds before the V-Chip lock takes effect.
6
7
8
4
5
2
Figure 21. V-Chip menu
Setting V-Chip Options
1. Highlight the V-Chip icon on the V-Chip Lock
menu (figure 20) and press ENTER to open the V-Chip
menu (figure 21).
2. Press ADJUST or to select On or Off.
3. If you selected On, press ADJUST to move to the
TV Rating box.
4. Press ADJUST or to select the TV rating level
you want to allow.
5. Press ADJUST to move to the TV content
categories.
• PressADJUST or to move between
categories.
• PressENTERtoaddcheckmarkstotheTV
content categories you want to block.
IMPORTANT
If you forget your four-digit pass code, see
Appendix C.
… 76 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-62628 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-62628 in the language / languages: English as an attachment in your email.

The manual is 7,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info