475319
71
Zoom out
Zoom in
Previous page
1/124
Next page
Chapter 5. TV Menu Operations 71
Record Menu, continued
Record List
Figure 16
To see a list of all currently programmed recordings, select
the record list option on the Record menu or press GUIDE
while viewing the Recording setup screen. A maximum of
32 recordings can be scheduled. To page through the list,
press CH or .
To Cancel Scheduled Recordings
To remove a recording from the record list, use
or
to highlight the scheduled recording and then press
CANCEL.
To Cancel a Recording in Progress
1. Press DEVICE to display the Device Selection menu.
2. Highlight the icon for the source device and verify
that the icon for the recording device apears in the
connection section.
3. Press CANCEL
Figure 16. Record List screen
TV Guide On Screen® and the Record
List
Programs scheduled through TV Guide On Screen do not
appear on this record list. Refer to the separate TV Guide
On Screen® User’s Guide for information regarding
scheduling recordings with TV Guide On Screen.
If there is a conflict between recordings scheduled
through TV Guide On Screen and the Record List, the TV
Guide On Screen recording takes priority.
Default Digital (Record) Device
This setting allows you to choose the default device to
use when recording digital programs using the REC key
from within ChannelView™ (page 60) or TV Guide On
Screen®. Use this option only if you have more than one
recording device set up in Netcommand.
Analog Recordings
When you record a 16:9 digital channel to an analog
VCR or recording device, there is a mismatch between
the picture shape of the 16:9 ratio of the source and the
narrower 4:3 ratio of the analog recorder.
• ForanamorphicplaybackonthiswidescreenTV,
choose the anamorphic picture display and ensure
that the TV screen format is set to standard (see the
section on TV formats in this Owner’s Guide).
• Forcroppedplaybackonanolderstyle4:3TV,
choose the cropped display to remove the top
and bottom sections. This setting does not affect
recording from analog devices, analog channels, or
4:3 digital channels.
Setting Up Analog Recordings with TV
Guide On Scree
When setting up a recording using TV Guide On Screen,
note that:
• Youmustselectthedesiredrecordingdeviceinthe
TV Guide On Screen Record Options menu.
• Analogprogramscanonlyberecordedtoananalog
recording device, such as a VCR.
• Analogprogramscannotberecordedtodigital
devices such as A/V discs or DVCRs.
• Thedestinationrecordingdeviceforanalogprograms
must be the analog device connected to the TVs
RECORD OUTPUT jacks.
IMPORTANT
When setting up analog recordings in
TV Guide On Screen, you must set the
destination recording device as the analog
device connected to the TV’s RECORD
OUTPUT jacks.
A digital recording can be made on either a digital or
analog device. For best playback quality, however,
record digital programs on a digital recording device.
Not that analog recordings can only be made on the one
analog device connected to RECORD OUTPUT (usually a
VCR) and are not affected by this setting.
If multiple devices were not connected and then added
in the NetCommand setup, this setting will be unavailable
(grayed out).
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-62628 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-62628 in the language / languages: English as an attachment in your email.

The manual is 7,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info