475319

Mitsubishi WD-62628 Manual

54
Zoom out
Zoom in
Previous page
1/124
Next page
54 Chapter 3. NetCommand Setup and Editing
Adding IEEE 1394 Devices Automatically
Name for 1394 Device Screen
Figure 29
If you choose to add the discovered IEEE 1394 device,
the Name for 1394 Device screen appears. Enter a new
name for the device or use the default name that appears
automatically. The name used in this screen is the name
that appears in the Device Selection menu.
The DV option applies only to digital camcorders at
this time and is typically detected automatically by the
TV. If your camcorder uses DV formatting but the box is
unchecked, add the check mark manually.
To use the analog capability of some IEEE 1394 devices,
such as some DVCRs and cable boxes, check the Analog
Connection box.
• SomeDVCRs,forexample,canrecordandplay
as VHS or S-VHS in addition to D-VHS. This
allows you to play analog rental tapes or analog
tapes from your established library or to make
analog recordings from an antenna or cable
system.
• SomecableboxeswithIEEE1394connections
require an analog connection for on-screen
guides and emergency notices.
Note: You never need to check both the DV and Analog
Connection check boxes for a device.
Figure 29. Name for 1394 Device screen
Adding IEEE 1394 Devices
Automatically
Addition of IEEE 1394 devices is a special case of
NetCommand setup because the devices are detected
automatically. You review, edit, and delete these devices
through NetCommand just as you would any other
devices.
When you connect an IEEE 1394 device to the TV network
and power it on, the new device automatically announces
its presence. This process is called device discovery and
can take up to one minute.
Some non-audio/video or incompatible IEEE 1394 devices,
such as personal computers (PCs), may not announce
their presence to the TV. The TV is not able to show these
devices in the Device Selection menu. They can, however,
coexist and are still available to other devices on the IEEE
1394 network that are compatible with these non-audio/
video devices.
Try using the Cable/SAT/DTV position of the TV remote
control to see if it can control operation of IEEE 1394
cable boxes and satellite receivers. If not, use the remote
control that came with the device.
New 1394 Device Screen
Figure 28
When your TV discovers a new IEEE 1394 device, the
New 1394 Device screen appears. Select “Add” or “Do
Not Add” depending on whether or not you want the
device added to the Device Selection menu. If the IEEE
1394 device does not provide audio and video, you may
not want to add that device to the TV’s Device Selection
menu. Devices that were discovered but not added to
the Device Selection menu will still be listed in the Review
screen of the Edit NetCommand
®
menu.
Figure 28. New 1394 Device screen
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-62628 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-62628 in the language / languages: English as an attachment in your email.

The manual is 7,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info