475277
75
Zoom out
Zoom in
Previous page
1/88
Next page
Appendices 75
Appendix E: Troubleshooting, continued
General TV Operation
Symptom Remarks
1. A fan is running even while the TV is powered
off.
The room is too warm. When the TV is off, internal components
continue to draw power and must be cooled by the fan.
2.
The fan gets louder after the TV is shut off.
Normal operation. The fan speeds up to cool the lamp quickly
after the TV has been shut off.
3.
The TV remote control does not work. Check that the batteries are fresh and installed correctly.•
Check that the control mode on the remote is set to TV.•
Be no more than 20 feet from the TV when using the remote control.•
Program the remote control to operate the TV or other device.•
Reset the remote control.•
4.
When I try to use the remote control, the
POWER key blinks five times.
Replace the batteries.
5.
TV does not respond to the remote control or
to control-panel buttons and TV will not power
on or off.
Unplug the AC power cord for 10 seconds.•
Press and hold the POWER button on the control panel to •
perform system reset.
6.
When a device is selected from the Activity
menu, the screen is blue or black (no signal
source).
• Makesuretheselecteddeviceisturnedon.
• Beginplayofthedevice.
7.
You have forgotten your Lock menu pass code. See “Bypassing the Parental Lock”, Appendix B.
8.
Rating restrictions are not working.
Open the Lock > Parental Lock menu and:
• Verifythattheratingslocksareactive.
• ChecktheLockTime/UnlockTimetocheckifratingrestric-
tions are disabled.
• RatingrestrictionsapplyonlytocontentontheANTinput.
9.
On-screen displays appear each time you
change a function.
Normal TV operation.
10. A warning message appeared on screen
stating, “TV will shut down in a few seconds.
Please check if the air flow is blocked.
• InternalTVtemperaturehasexceededproperlevels.Cool
the room.
• TheTVhasoverheated.Clearblockedairventsandensure
at least four inches of clearance on all sides of the TV.
• Cleantheairfilteronthelampcartridge.
11.
I have turned on CEC for my HDMI devices but
control is erratic and I wish to disable it.
First •
turn off the TV’s HDMI control for the specific device.
Open the Inputs > HDMI Control menu, select the device,
select Off.
Disable CEC on the device itself. See the device’s instruc-•
tions.
If the problem persists, do the following:•
Disconnect the device from the TV.1.
Open the Inputs > Name menu and select Delete for the 2.
device.
Reconnect the device to the TV and Auto Input Sensing 3.
will recognize the device with CEC disabled.
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-60737 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-60737 in the language / languages: English as an attachment in your email.

The manual is 5,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info