475268
5
Zoom out
Zoom in
Previous page
1/40
Next page
5
For assistance call 1(800) 332-2119
Setup and Operation
1
Remote Control
Two AA Batteries
AA
AA
Owner’s Guide
Quick Setup Guide
Product Registration
Card
Package Contents
Please take a moment to review the following list of
items to ensure that you have received everything.
Installing the R emote Control
Batteries
Remove the remote control’s back cover by gently
1.
pressing on the tab and lifting off the cover.
Load the batteries, making sure the polarities
2.
(+) and (-) are correct. For best results, insert
the negative (-) end first.
Snap the cover back in place.
3.
2
1
The remote
control requires
two AA
batteries.
Before You Power on the TV
Review the important safety, installation, and oper-
1.
ating information at the beginning of this book.
Choose a location for your TV.
2.
Allow at least four inches of space on all sides
of the TV to help prevent overheating. Over-
heating may cause premature failure of the TV
as well as shortened lamp life.
Avoid locations where light may reflect off the
screen.
See the stand requirements on page 2 .
Install the batteries in the remote control.
3.
Plug the TV into an AC power outlet.
4.
First-Time Power-On
Connect your devices to the TV.
1.
See • page 15 for suggestions.
If using an antenna or direct cable service (no
cable box), connect the incoming coaxial cable
to the TV’s
ANT
input. Refer to page 18 .
Make note of which device is connected to
each TV input.
Power on the TV.
2.
Aim the emitter end of the remote at the TV and
press
POWER
.
Follow the on-screen instructions for basic
3.
setup:
a. Select a menu language.
b. Select your time zone.
c. Select Yes or No for Daylight Saving Time.
d. Select the source connected to the TVs
ANT
input jack, either an over-the-air antenna or
direct cable service without a box. Skip this
step if nothing is connected.
e. Perform a channel scan for channels available
from the
ANT
input.
f. Wait a few moments for the screen to clear.
Getting Started
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-60638 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-60638 in the language / languages: English as an attachment in your email.

The manual is 2,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info