475316
83
Zoom out
Zoom in
Previous page
1/108
Next page
Chapter 7. Using IEEE 1394 Devices 83
Recording from the ChannelView™ Channel
Guide
ChannelViewprovidesprogramlistings,assentbythe
broadcasters,formemorizedchannelson
ANT 1
and
ANT 2
.Pressthe
GUIDE
keywhilewatching
ANT 1
or
ANT 2
toviewChannelViewlistingsandtosetupimme-
diateorfuturerecordingsasdescribedhere.
Immediate Recording from ChannelView
1. Press
INPUT
toopentheInputSelectionmenu.High-
lightan
ANT 1
or
ANT 2
programsourceandpress
ENTER
.
2. Press
GUIDE
toopentheChannelViewchannelguidefor
thecurrentinput.
3. Use tohighlightthechannelandprogramyou
wishtorecordfromthelistofchannels.
4. Press (
RECORD
).
Ared“R”temporarilydisplaysnexttotheprogram
listingtoindicatetheprogramwillberecorded.
5. Press
EXIT
toreturntoTVviewing.
Time-Delayed Recording from ChannelView
Set Up the Recording
1. EnsurethatTVEnergyModeissettoFast Power On
andtheTVclockissettothecorrecttimeandday.
See“SetupMenu”inchapter4,“TVMenuSettings.
2. Performsteps1and2describedabove.
3 Press tohighlightthesourcechannelyouwishto
recordfrom.
4. Press toviewalistoffutureprogramsonthat
channel.
5. Press tohighlightafutureprogram.
6. Press (
RECORD
).
Ared“R”temporarilydisplaysnexttotheprogram
listingtoindicatetheprogramwillberecorded.
Youcanscheduleamaximumof32recordings.
7. Press
EXIT
toclosethemenu.
Confirm the Recording Setup
1. Press
(
RECORD
)toopentheRecordmenu.
2. Press
GUIDE
toopentheRecordList(figure2)andview
allscheduledrecordings.Press
CH
/ topage
quicklythroughthelist.
3. Verifythattheprogramyouwishtorecordappearsin
thelist.
4. Press
EXIT
toclosethemenu.
Recording to IEEE 1394 Recordable
Devices, continued
Cancelling Recordings
To Cancel a Recording in Progress
1. Press
INPUT
toopentheInputSelectionmenu.
2. Movethehighlighttothesourceinputicon.Thereis
noneedtopress
ENTER
.
TheInputSelectionmenudisplaysaniconforan
activerecordingconnectiontoarecordableIEEE1394
device.SeetheIEEE1394connectioniconinfigure3.
3. Press
CANCEL
.Theconnectioniconwilldisappearto
indicateterminationoftherecordingconnection.
4. Press
EXIT
toreturntoTVviewing.
Connection
Icon
Audio
Icons
Figure 3. The Input Selection menu displays specialized
icons for IEEE 1394 devices. The audio icons are
displayed only when an IEEE 1394 amplifier is connected.
To Cancel a Scheduled Recording
1. Press (
RECORD
)toopentheRecordmenu.
2. Press
GUIDE
toopentheRecordList(figure2)andview
allscheduledrecordings.Press
CH
/ topage
quicklythroughthelist.
3. Highlighttheprogramyouwishtoremovefromthe
RecordListandpress
CANCEL
.
4. Press
EXIT
toclosethemenu.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi WD-57731 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi WD-57731 in the language / languages: English as an attachment in your email.

The manual is 8,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info