32969
26
Zoom out
Zoom in
Previous page
1/64
Next page
26
26
Part III: Setup
Activation of the System 4 Home
Theater IR Control
You can, with certian digital A/V receivers,
set up the remote control to automatically
select the correct audio input when you
press the HOME THEATER button. At the
same time, the TV will select the correct
video input. This allows you to watch your
best type of video (Component, S-Video)
with your best type of audio (Dolby Digital,
Pro Logic, etc.) conveniently. See System
4 Home Theater IR Control, page 20, for
connection instructions.
Once properly activated, when the HOME
THEATER button is pressed, System 4 Oper-
ates in 2 parts:
AUDIO
Changes a compatible digital A/V
receiver to the correct input for the device
you wish to operate.
VIDEO
Changes the TV to the correct input
for the device you wish to operate.
Both functions can operate simultaneously
with one touch of the HOME THEATER
button. However, you may activate only one
if you desire (video to control the TV or
audio to control the A/V Receiver). The
remote control must be programmed to the
appropriate A/V Receiver code prior to the
activation of the audio portion (see To Pro-
gram the Remote to Control Other Brands of
Audio and Video Products, page 24).
Programming the Remote Control:
To Activate the System 4 Home Theater IR Control
Models VS-60719 and VS-70709
Activate the System 4 Home Theater IR Control
To Activate the Audio Portion:
1
Press and hold the HOME THEATER button.
2
Press and release the AUDIO button.
To Activate the Video Portion:
(Figure 1)
1
Press and hold the HOME THEATER button.
2
Press and release the VIDEO button.
3
Name the TV input as instructed.
Name Input
Cannot be named
CABLE
DBS
VCR
DVD
Device You Are Using
Cable Box connected to ANT-A or ANT-B
Cable Box connected to Inputs 1-3
Satellite Receiver connected to any input
VCR connected to Inputs 1-3
DVD connected to Inputs 1-3
Name TV Input as Shown Below
(see pg 36 for naming help)
3
2
VIDEO
1
HOME
THEATER
Figure 1. Activating the video portion of System 4.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi VS55609 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi VS55609 in the language / languages: English as an attachment in your email.

The manual is 11,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info