Manual Mitsubishi UD8900U (page 22 of 80) (English)

549860

Zoom out

Zoom in

1/80

EN-22

Viewing computer images (continued)

9. Press the ZOOM/FOCUS button to display the ZOOM/FOCUS menu.

10. Adjust with the  or  button to get an approximate size.

• WhentheENTERbuttonispressedwhiletheZOOM/FOCUSmenuisdisplayed,theadjustmentmodeis

switched between FAST and STEP. When FAST is selected, the speed of zoom controlled by the  or 

button becomes fast, and it becomes slow when STEP is selected.

11. Press the LENS SHIFT button. The LENS SHIFT menu appears at the center of the screen.

12.Press the  or  button to adjust the vertical position and  or  button to adjust the horizontal position of the

displayed image.

• Whentheimageisnotdisplayedwithinthescreen,adjusttheprojectionangle.Inaddition,performthe

keystone adjustment, if necessary. (See page 14.)

Repeat steps 4, 5 and 9 to 12, if necessary.

Important:

• Focus,zoomandlensshiftadjustmentispossibleinthenormalpicturemodeonly.

• Whena16:9imageiskeptdisplayedforalongtimebeforedisplaying4:3image,theafterimagesoftheblackbars

may appear on the 4:3 image screen. Consult your dealer in this case.

To stop projecting:

13. Press the POWER button.

• Aconrmationmessageisdisplayed.

• Tocanceltheprocedure,leavetheprojectorforawhileorpressanybuttonexceptthePOWERbutton.

14. Press the POWER button again.

• Thelampgoesoutandtheprojectorgoesintoastandbymode.Inthisstandbymode,theLAMPindicator

blinks green.

15. Wait about 2 minutes for the LAMP indicator to be turned off.

• Duringthisperiodof2minutesinthestandbymode,theintakefanandexhaustfanrotatetocoolthelamp.

• Theairoutletfansrotatefasterasthetemperaturearoundtheprojectorrises.

• Thoughthefansmakeloudsoundsduringcooling,suchsymptomisnotamalfunction.

16. Unplug the power cord from the outlet.

• ThePOWERindicatorwillgoout.

• Ifthepowercordshouldbeunpluggedaccidentallywhileeithertheairinletfanortheairoutletfansare

operating or the lamp is on, allow the projector to cool down for 10 minutes with the power off. To light the

lamp again, press the POWER button. If the lamp doesn’t light up immediately, press the POWER button a few

minutes later. If it should still fail to light up, replace the lamp.

• Coverthelenswiththelenscaptoprotectitfromdust.

• Ifnecessary,disconnectthecablesfromthecomputerafterunpluggingthepowercord.

Direct Power OFF

You can turn off this projector just by unplugging the power cord without pressing the POWER button.

• Don’tshutdowntheprojectorwhiletheLAMPindicatorisblinkingafterthelamplightsupbecausethelamp’slife

may be shortened.

• Don’tturntheprojectorbackonrightaftershuttingitdownbecausethelamp’slifemaybeshortened.(Waitabout

10 minutes before turning the projector back on.)

• Beforeshuttingdowntheprojector,besuretoclosethemenuscreen.Ifyoushutdowntheprojectorwithout

closing the menu, the setting data of the menu may not be saved.

• Ifyoushutdowntheprojectorwhilecontrollingtheprojectorusingthenetworkfunction,theapplicationsoftware

such as ProjectorView may fail. The data such as the operating time and temperature display may not be

changed. In such a case, close the browser and then start up again.

• Don’tshutdowntheprojectorwhilethelterisrolling(whiletheFILTERindicatorisblinkinggreen).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi UD8900U in the language / languages: English as an attachment in your email.

The manual is 11,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi UD8900U

Mitsubishi UD8900U Additional guide - English - 32 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mitsubishi UD8900U Manual

Product: