493624
24
Zoom out
Zoom in
Previous page
1/32
Next page
EN 24
Maintenance
Cleaning of the projector and the
ventilation slots
Use a soft cloth to clean the projector and the ventila-
tion grilles. When the grilles become dirty, wipe them
with a soft cloth dampened with diluted mild deter-
gent, and then wipe them with a dry cloth.
To protect the surface of the projector from fading or
deteriorating:
Do not spray insecticide on or inside the projector.
Do not use benzine or thinner to clean it.
Do not let rubber or plastic materials come into
contact with projector.
Cleaning of the lens
Use a standard lens-cleaning brush or a piece of lens
tissue dampened with lens cleaning fluid. The lens
surface is fragile. Use only recommended, nonabra-
sive lens-cleaning materials. Do not touch the lens
with your fingers.
Caution:
Be sure to turn off the lamp and unplug the power
cord from the wall outlet before you perform any
maintenance on the projector.
Cleaning of the air-filter
Clean the air-filter fre-
quently (about once a
month). If the filter or
ventilation grilles become
clogged with dirt or dust,
the temperature inside
the projector may rise and
cause troubles, such as
damage to the inside
parts and shortening the
life of the panels.
When the temperature
inside the projector rises, the STATUS indicator
will blink orange and the lamp will be turned off.
1. Put the projector upside
down and raise the lock of
the filter cover in the
direction of the arrow.
2. Remove the air-filter.
3. Wash the air-filter or
change it with a new filter.
Use water or diluted
mild detergent to clean
the filter. Rinse the filter
thoroughly and let it dry
completely.
4. Attach the air-filter.
5. Attach the filter cover to the projector.
Make sure that the air-filter is attached
correctly without displacement.
Important:
If the filter is damaged or becomes extremely
dirty, change it with a new filter. Contact your
dealer for a new filter.
The projector will not turn on if the air-filter
cover is attached improperly .
Caution:
Be sure to use the projector with an air-filter. If not,
dust may get inside the projector causing fire and
failure.
Filter cover
Lock
Air-filter
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi SL6U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi SL6U in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info