664856
124
Zoom out
Zoom in
Previous page
1/144
Next page
-
121
-
(d) Installation procedure
1) Mount the duct for the air inlet grille to the indoor unit
using the 10 tapping screws provided. The tapping screws
on the drain pan receiver side are also used for mounting
the duct for the air inlet grille. They must first be removed
and reinstalled after the duct for the air inlet grille is in
place. A guideline for the height is to secure the assembly
so that the lower surface of the duct for the intake grille is
approximately 10 mm above the bottom surface of the
ceiling.
2) Remove the center screw for the air inlet grille and open
the grille as shown in the illustration. Next, insert the air
inlet grille into the duct for the air inlet grille and secure it
with the pan-head screws (the long screws).
3) Use the pan-head screws to make the small adjustments
in height. The height dimension on the installation dia-
gram allows for adjustment within range of 80 to 100 mm.
If the pan-head screws are completely tightened, the height
will be 80 mm.
7.4 Ducted type (SRRM) optional parts
Table of optional parts
(1) Bottom air inlet grille set
(a) Part No.: RTS12
(b) Parts list
(c) Installation
Unit: mm
Bottom air inlet grille set
RTS12
1 Rear inlet filter set
RBF12
2 Duct joint for air outlet plate
RFJ22
3 Drain up kit
RDU12E
4
Name Qty.
1
1
10
4
Air inlet grille
Duct for air inlet grille
Tapping screw
Pan-head screws
740
Indoor unit
762 (Ceiling opening dimensions)
782 (Panel dimensions)
11
2
10
11
2
10
258 (Ceiling opening dimensions)
278 (Ceiling opening dimensions)
11.5
455
Indoor unit
Ceiling surface
2
10
2
10
230
(10)
Air outlet side
80 ~ 100
(Drain pan receiver)
Pan-head screw
Air inlet grille
Tapping screw
Duct for air inlet grille
Indoor unit
124


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi SKM25ZG-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi SKM25ZG-S in the language / languages: English as an attachment in your email.

The manual is 6,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi SKM25ZG-S

Mitsubishi SKM25ZG-S User Manual - German - 24 pages

Mitsubishi SKM25ZG-S User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info