215750
18
Zoom out
Zoom in
Previous page
1/28
Next page
EN-18
Menu operation (continued)
5. Setting menu
6. Language menu
7. Factory Default menu
Menu option Setting Feature description
Menu Position 5 options Choose the menu location on the display screen.
Mounting 4 options
Adjust the picture to match the orientation of the projector: upright or
upside-down, in front of or behind the screen. Invert or reverse the
image accordingly.
Logo On, Off Choose to display the logo or not.
Signal Type
RGB For VGA signal
YCbCr/YPbPr For Component I,P signal
Lamp Time
Display the lamp's elapsed operating time (in hours).
The displayed lamp time is based on low lamp mode setting.
(The lamp lifetime is 3000 hours.)
Lamp Time Reset Yes, No Reset the lamp time to 0 hours.
Auto Power On Yes, No
When this mode is set to Yes, the lamp is automatically lit when the
power cord is plugged in the wall outlet. Select Yes when you set the
projector at the ceiling.
When the lamp is off, the projector is in standby. Use the remote
control to turn on the lamp.
Auto Power Off No, 5-60 Min.
Selects a desired timer setting until the projector enters the standby
mode when there is no signal input from the source.
Auto Source Yes, No Automatically scan the input source.
Lamp Mode
Standard Select this setting when you want to view images in a well-lit room.
Low
Select this setting when you want to view images at a moderate light
intensity. The operating sound is consequently reduced, and the lamp
lifetime becomes longer.
When this mode is switched, projected images may flicker.
If this mode is frequently switched, the lamp may be deteriorated.
The default setting is Standard when shipment.
The Lamp Mode cannot be switched for about 1 minute after the
lamp is on.
OSD Timeout 5 - 60 sec Duration OSD menu stays active (at idle state by second).
Menu option Setting Feature description
Language 11 languages Select the language used by the on-screen menu.
Menu option Setting Feature description
Factory Default Yes, No Restore all menu settings to factory default settings.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi sd210u at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi sd210u in the language / languages: English as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info