583418
25
Zoom out
Zoom in
Previous page
1/802
Next page
– 24 –
Setting the representative unit and demand4
Directly press a unit name to select the unit from the list of Unit Entry.10.
Press the Rep. cell. 11.
That unit is set as the representative unit, and an asterisk is placed to the left of its name in the display.
Representative unit: unit for which the status is shown when the group is displayed ·
Press the Demand cell.12.
That unit is set as for the demand operation, and a mark such as D1, D2, or D3 is placed to the right of its
name.
Demand: · A unit that shifts its set temperature by 2 deg C or switches to fan mode when there is an
external demand input, and then cannot be operated from the remote controller.
Note
By the demand input, it is possible to save on power costs by reducing the power consumption.
Operation of the unit when demand input is released, is conformed to nearest schedule before release time
of the day.
page 43
In case schedule of the day is not set, the unit is for the operation mode and remote controller permission/
prohibition setting which is just before the demand input.
Up to three demand levels can be set. In level 1, the set temperature of the air conditioner set to D1 shifts by
2 deg C (+2 deg C in cooling or dry mode or -2 deg C in heating mode). In level 2, the units set to D1 or D2
switch to fan mode. In level 3, the units set to D1, D2, or D3 switch to fan mode.
To use the demand control, a demand signal must be inputted. For more information, contact your installation *
contractor or dealer.
Setting and unsetting batch operation for the group5
Press the VALID or INVALID button.13.
VALID: group set up for batch operation ·
INVALID: group not set up for batch operation ·
Saving the settings6
Press the SET button. Press the Yes button on the confi rmation screen. 14.
The group settings are saved. When you do not want to save the settings, press the No button.
Note
1 to 16 units can be registered in a group.
When you will delete all group defi nition, press the DELETE ALL SETTING button and enter your password
Press the Yes button on the confi rmation screen.
Caution
All schedule settings are deleted too.
Attention
If an unconnected air conditioner is registered in a group, a “Communication error” may occur, affecting
communication of the whole system and causing an unintended operation to be performed. Do not register
unconnected units in a group.
Also note that, at the initial setting, one air conditioner is registered in one group in advance. If the unit is
an unconnected unit, it must be deleted individually. It is recommended that, when registering new groups,
you press the “DELETE ALL GROUPS” button to delete all groups once, and then register groups for
connected units. That certainly is an easier way to confi gure the settings as well as a sure method to prevent
communication errors.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi SC-SL4-AE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi SC-SL4-AE in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 164,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info