515864

Mitsubishi SC-SL3N Manual

28
Zoom out
Zoom in
Previous page
1/386
Next page
– 27 –
The timeout for turning OFF the backlight, validating or invalidating of the auto mode button and locking or un-
locking the individual functions of the remote controller are set.
When changing the Function Settings, follow the following steps.
1. Press the FUNCTION SETTING button on the MAIN MENU.
Page 7
[Function Setting screen]
2. Select the Backlight Timeout time using the
▲▼
buttons. (Factory default : 10)
Time from the last operation on the touch panel until the monitor backlight turns OFF can be selected.
3. Select the Brightness using the
▲▼
buttons. (Factory default : 7)
Brightness for the monitor backlight can be selected.
4. Change "Language". Pressing this button allows you to select the desired language.
Please contact the shop where the unit was purchased.
5. Change "SL-Mode". Use it when set the communication system (Factory default : New).
Usually, this is not necessary to change it.
If setting is incorrect, this may cause no communication with a part or all of air conditioners.
Please contact the shop where the unit was purchased.
6. Press the Change button.
You can specify the folder to transfer the calculated data to USB memory. (SC-SL3NA-BE only)Note
7. Press the "Valid" or "Invalid" button for the Auto Mode. (Factory default : Invalid)
This enables or disables the AUTO button on the GROUP SETTINGS screen and CHANGE All screen.
If you set Auto Mode to INVALID,
Auto button is not shown on the screen.
This function can be applied to the outdoor units, which are the cooling / heating free multi KXR, GHP-R
series or later and PAC.
For other than the outdoor units above, please do not use Auto Mode.
Please contact the shop where the unit was purchased.
8. Press the "Valid" or "Invalid" button for the Fan Powerful Mode. (Factory default : Invalid)
This enables or disables
button on the GROUP SETTINGS screen and CHAGE All screen.
If you set Fan Powerful mode to Invalid,
button is shown on the screen.
Please contact the shop where the unit was purchased.
9. Select the "Closed" or "Open" for the Malfunction Output (Normal). (Factory default : Closed)
You can choose "Closed" or "Open" status for malfunction output during normal operation of air condition-
ing unit.
Contact your service representative or installer for further information.
10. In case of managing one air conditioner with plural center consoles, regarding the prohibition set-
ting of remote controller if the different settings from plural center consoles are done on this air
conditioner, it may cause that this air conditioner cannot start operation by the remote controller
despite the intention of user. Accordingly, in this case, be sure to make permission/prohibition set-
ting only with the master center console, not with slave center consoles.
(Factory default :Valid)
In addition, make this setting to "valid" when the external input wiring such as emergency stop input are
connected to this central control.
Please contact the shop where the unit was purchased.
Function Settings
2
4
5
6
3
13
10
11
12
7
8
9
[Detail Setting screen]
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi SC-SL3N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi SC-SL3N in the language / languages: English, German, Dutch, French, Italian, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 41,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info