587227
16
Zoom out
Zoom in
Previous page
1/34
Next page
– 15 –
Air ow direction adjustment
Up/down direction can be adjusted with the AIRFLOW U/D (UP/DOWN) button on the remote control. Every time you press this button
the mode changes as follows:
Change on AIRFLOW (UP/DOWN) mode.
Left/right direction can be adjusted with the AIRFLOW L/R (LEFT/RIGHT) button on the remote control. Every time you press this
button the mode changes as follows:
Change on AIRFLOW (LEFT/RIGHT) mode.
MEMORY FLAP (FLAP OR LOUVER STOPPED)
When you press the AIRFLOW (U/D or L/R) button once while the fl ap or louver is operating, it
stops swinging at the position. Since this angle is memorized in the microcomputer, the fl ap or
louver will automatically be set at this angle when the next operation is started.
WARNING
Do not expose directly to airfl ow from the air-conditioner for a long time.
CAUTION
When in COOL or DRY operation, do not operate for a long period with the
airfl ow blowing straight down. Otherwise, condensation may appear on the
outlet grill and drip down.
Do not try to adjust the fl aps and louvers by hand, as the control angle may
change or the fl ap or louver may not be closed completely.
HEAT
(Horizontal
blowing)
(Slant forward
blowing)
COOL, DRY
Recommended angle of the flap when
stopping
When operation starts, the fl ap and louver direction is fi xed at the horizontal / center position in order to avoid cold draft, and return
to the set the position that was set after the warm air supply is starting.
The fl ap and louver direction will be controlled to the horizontal/center position when the room temperature reaches the set
temperature and compressor stops or when defrosting is in operation.
The airfl ow direction cannot be set during the period mentioned above. Change the airfl ow direction settings after the warm air is
supplied and the fl ap/louver goes to the set position.
(Swing)
(Flap stopped)
(Louver stopped)
(Swing)
NOTE FOR HEATING OPERATION
The actual position of the fl ap and louver may differ from the display shown.
NOTE
3D AUTO operation
Fan speed and air ow direction are automatically controlled, allowing the entire room to be ef ciently conditioned.
Press the ON/OFF button.
Press the 3D AUTO button.
Each time the 3D AUTO button is pressed, the display is switched in the
order of:
1
2
(Normal operation)(3D AUTO)
No display
3D AUTO operation is canceled when you switch the operation mode.
If 3D AUTO operation is cancelled then the air fl ow direction changes to
that used before 3D AUTO was set.
3D AUTO operation can be set in AUTO, COOL, or HEAT operation mode
only.
NOTE
Releasing procedure
Press the 3D AUTO button to turn off the 3D AUTO display.
RLD012A002G_EN.indd 15RLD012A002G_EN.indd 15 2015/02/27 14:36:412015/02/27 14:36:41
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi RLD012A002G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi RLD012A002G in the language / languages: English as an attachment in your email.

The manual is 5,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi RLD012A002G

Mitsubishi RLD012A002G User Manual - German - 34 pages

Mitsubishi RLD012A002G User Manual - Dutch - 34 pages

Mitsubishi RLD012A002G User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info