587225
16
Zoom out
Zoom in
Previous page
1/22
Next page
15
To fix the position of the swing louver
Press AIR FLOW button when the louver position indication comes to the position where you
would like to fix it.
Auto swing display stops at the position and then the swing louver stops and be fixed.
NOTICE
Press the button and auto swing display stops immediately, then the swing louver stops
later, but this is not a failure. (Auto swing display and the actual louver movement of the air
conditioner are not synchronized)
The swing louver movement during heat preparation
When “heat preparation” is displayed, the position of the swing louver
sets horizontal automatically. (The display of remote control keeps the set
position)
When heat preparation ends and normal operation starts, the position of
the swing louver returns to the set position.
Recommended air frow direction
position (when fixed)
A
B
C
D
COOL
DRY
AUTO
HEAT
How to move swing louver
Press AIR FLOW button when the air conditioner is in operation.
The swing louver moves up and down, and the display moves too.
NOTICE
The actual movement of swing louver and that of display are not
synchronized but this is not a failure.
UP AND DOWN ADJUSTING
continuous movement of display
HOW TO ADJUST THE LOUVER < WIRELESS REMOTE CONTROL >
horizontal position
FOR COMFORTABLE USE
See page 12
ATTENTION
Do not set the position of the swing louver downwards for a long time. Dew formation on the side panel may drop.
(in case of FDE)
CHECK INDICATION, FILTER SIGN
< WIRELESS REMOTE CONTROL >
WHEN LONG FLASHING LIGHT ( ) IS SHED FROM THE TIMER/CHECK INDICATOR LAMP (YELLOW)
Clean the filter.
See page 16. 17
When cumulative running time reaches amount number of hours, long flashing light (light for 2 seconds, wink out for 1 second) is shed
from the timer/check indicator lamp (yellow).
After cleaning of filter, press the FILTER button on the remote control to turn off the filter cleaning sign. (Press the button for one second
or more)
NOTICE
The cumulative running time for filter sign can be changed. Consult your dealer for more information.
Light for 2 seconds,
wink out for 1 second
WHEN SHORT FLASHING LIGHT ( ) IS SHED FROM THE TIMER/CHECK INDICATOR LAMP (YELLOW)
Something is wrong with the air conditioner.
Immediately after the timer/check indicator lamp flashes (light for 0.5 second, wink out for 0.5 second), the air conditioner stops.
Address No. and error code are shown on the display on the indoor unit.
The monitor display is turned off after the display time.
When nothing is displayed on the monitor, operate the remote control or press the BACKUP button resume.
Please tell your dealer “address No. and error code”, “symptom of the trouble”, “air conditioner type” and “model name” etc.
Press ON/OFF button to stop the unit.
Light for 0.5 second,
wink out for 0.5 second
NOTICE
For
FDTW, FDK and FDFW
, address No. is not shown on display.
NOTICE
For FDTW, FDK and FDFW, check indicator lamp “check1” / “check2” shows error code.
The number of blinking shows the error code number of tens/ones place and check1/check2 corresponds to tens/ones place.
Detail of display
Follow the instruction mentioned below according to the indoor unit type.
Ceiling cassette-4 way-(FDT)
Ceiling cassette-4 way Compact (600×600mm)-(FDTC)
TIMER
CHECK RUN
Ceiling suspended (FDE)
Ceiling cassette - 2 way (After FDTW-KXE6F)
Floor standing -2way- (FDFW)
Check monitor
Timer/check
Indicator lamp
Check monitor Timer/check Indicator lamp
Check indicator lamp
Timer/check
Indicator lamp
Wall mounted (FDK)
RUN
TIMER/CHECK
CHECK1 CHECK2
Check indicator lampTimer/check Indicator lamp
CHECK1
CHECK2 TIMER/CHECK RUN
Check indicator lamp
Timer/check
Indicator lamp
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi PJZ012A087B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi PJZ012A087B in the language / languages: English as an attachment in your email.

The manual is 10,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi PJZ012A087B

Mitsubishi PJZ012A087B User Manual - German - 22 pages

Mitsubishi PJZ012A087B User Manual - Dutch - 22 pages

Mitsubishi PJZ012A087B User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info