617119

Mitsubishi Outlander Sport - 2014 Manual

161
Zoom out
Zoom in
Previous page
1/384
Next page
Multi-information display
5-98 Features and controls
5
N00557000227
You can change the mode condition for the
average fuel consumption and average speed
display to “Auto reset” or “Manual reset.”
1. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings
(With ignition switch or operation mode
is in ON)” on page 5-96.
2. Lightly press the multi-information meter
switch to select “AVG” (average fuel con-
sumption and average speed setting).
3. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to switch in sequence from A or 1
(Auto reset) M, 2 or P (Manual reset)
A or 1 (Auto reset).
The setting is changed to the selected
reset condition.
If you press and hold the multi-informa-
tion meter switch when the average fuel
consumption and average speed are dis-
played, these calculations will be reset to
zero.
When the following operation is per-
formed, the mode setting changes auto-
matically from manual to auto.
[Except for vehicles equipped with the
F.A.S.T.-key]
Turn the ignition switch to the “ON” posi-
tion from the “ACC” or “OFF” position.
[For vehicles equipped with the F.A.S.T.-
key]
Change the operation mode to ON from
ACC or OFF.
When the average fuel consumption and
average speed are being displayed, if you
hold down the multi-information meter
switch, these calculations will be reset to
zero.
When the engine switch or the operation
mode is in the following conditions, the
average fuel consumption display and the
average speed display will automatically
reset.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch has been set to the
“ACC” or “OFF” position for about 4
hours or more.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode has been in ACC or
OFF for about 4 hours or more.
Changing the reset mode for aver-
age fuel consumption and average
speed
Type 1
Type 2
Manual reset mode
Auto reset mode
Disconnecting the battery cable will erase
from memory the manual reset mode or auto
reset mode setting for the average speed dis-
play and average fuel consumption display.
The initial (default) setting is “Auto reset
mode”.
BK0202700US.book 98 ページ ２０１３年３月２８日　木曜日　午前１１時５４分
… 161 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi Outlander Sport - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi Outlander Sport - 2014 in the language / languages: English as an attachment in your email.

The manual is 49,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info