617119

Mitsubishi Outlander Sport - 2014 Manual

153
Zoom out
Zoom in
Previous page
1/384
Next page
Multi-information display
5-90 Features and controls
5
This displays the average speed from the last
reset to the present.
There are 2 types of mode settings as follows.
For details on how to change the average
speed display setting, refer to “Changing the
function settings (With ignition switch or
operation mode in ON)” on page 5-96.
When the average speed is being dis-
played, if you hold down the multi-infor-
mation meter switch, these calculations
will be reset to zero.
When the following operation is per-
formed, the mode setting changes auto-
matically from manual to auto.
[Except for vehicles equipped with the
F.A.S.T.-key]
Turn the ignition switch to the “ON” posi-
tion from the “ACC” or “OFF” position.
[For vehicles equipped with the F.A.S.T.-
key]
Change the operation mode to ON from
ACC or OFF.
When the average speed is being dis-
played, if you hold down the multi-infor-
mation meter switch, these calculations
will be reset to zero.
When the engine switch or the operation
mode is in the following conditions, the
average speed display will automatically
reset.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch has been set to the
“ACC” or “OFF” position for about 4
hours or more.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode has been set to ACC
or OFF for about 4 hours or more.
The driving range is determined based on the
fuel consumption data. This may vary
depending on the driving conditions and hab-
its. Treat the distance displayed as just a
rough guideline.
When you refuel, the driving range display is
updated.
However, if you only add a small amount of
fuel, the correct value will not be displayed.
Fill to a full tank whenever possible.
When your vehicle is stopped on an
extremely steep hill, the driving range value
may, change. This is due to the movement of
fuel in the tank and does not indicate any
breakdown.
The display setting can be changed to the
preferred units (miles or km).
Refer to “Changing the function settings
(With ignition switch or operation mode in
ON)” on page 5-96.
Average speed display
Manual reset mode
Auto reset mode
The average speed display and the average
fuel consumption display can be reset sepa-
rately in both auto reset mode and manual
reset mode.
“---” is displayed when the average speed
cannot be measured.
The initial (default) setting is “Auto reset
mode”.
The display setting can be changed to the
preferred units (mph or km/h).
Refer to “Changing the function settings
(With ignition switch or operation mode in
ON)” on page 5-96.
BK0202700US.book 90 ページ ２０１３年３月２８日　木曜日　午前１１時５４分
… 153 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi Outlander Sport - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi Outlander Sport - 2014 in the language / languages: English as an attachment in your email.

The manual is 49,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info