617119

Mitsubishi Outlander Sport - 2014 Manual

141
Zoom out
Zoom in
Previous page
1/384
Next page
Tire pressure monitoring system
5-78 Features and controls
5
The tire pressure monitoring system may not
work normally in the following circum-
stances:
A wireless facility or device using the
same frequency is near the vehicle.
Snow or ice is stuck inside the fenders
and/or on the wheels.
The tire inflation pressure sensor’s battery
is dead.
Wheels other than Mitsubishi genuine
wheels are being used.
Wheels that are not fitted with tire infla-
tion pressure sensors are being used.
Wheels whose ID codes are not memo-
rized by the vehicle are used.
Compact spare tire is fitted on a road
wheel.
A window tint that affects the radio wave
signals is installed.
N00532901192
If new wheels with new tire inflation pressure
sensors are installed, their ID codes must be
programmed into the tire pressure monitoring
system. Have the tire and wheel replacement
performed by an authorized Mitsubishi
Motors dealer to avoid the risk of damaging
the tire inflation pressure sensors. If the
wheel replacement is not done by an autho-
rized Mitsubishi Motors dealer, it is not cov-
ered by your warranty.
N00533001246
Your tire pressure monitoring system oper-
ates on a radio frequency subject to Federal
Communications Commission (FCC) Rules
(For vehicles sold in U.S.A.) and Industry
Canada Rules (For vehicles sold in Canada).
This device complies with part 15 of FCC
Rules and Industry Canada licence-exempt
RSS standard(s).
Operation is subject to the following two con-
ditions.
This device may not cause harmful inter-
ference.
This device must accept any interference
received, including interference that may
cause undesired operation.
If a tire has a puncture, replace that tire with
the spare tire. Driving on a punctured tire
could lead to an accident.
The warning light/display may not illuminate
immediately in the event of a tire blowout or
rapid leak.
To avoid the risk of damage to the tire infla-
tion pressure sensors, have any punctured
tire repaired by an authorized Mitsubishi
Motors dealer. If the tire repair is not done by
an authorized Mitsubishi Motors dealer, it is
not covered by your warranty.
Do not use an aerosol puncture-repair spray
on any tire.
Such a spray could damage the tire inflation
pressure sensors.
Have any puncture repaired by an authorized
Mitsubishi Motors dealer.
Tire inflation pressures vary with the ambi-
ent temperature. If the vehicle is subjected to
large variations in ambient temperature, the
tire inflation pressures may be under-inflated
(causing the warning light/display to come
on) when the ambient temperature is rela-
tively low. If the warning light/display
comes on, adjust the tire inflation pressure.
Whenever the tires and wheels
are replaced with new ones
The use of non-genuine wheels will prevent
the proper fit of the tire inflation pressure
sensors, resulting air leakage or damage of
the sensors.
General information
BK0202700US.book 78 ページ ２０１３年３月２８日　木曜日　午前１１時５４分
… 141 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi Outlander Sport - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi Outlander Sport - 2014 in the language / languages: English as an attachment in your email.

The manual is 49,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info