617119

Mitsubishi Outlander Sport - 2014 Manual

131
Zoom out
Zoom in
Previous page
1/384
Next page
Active stability control (ASC)
5-68 Features and controls
5
N00559200076
On slippery surfaces, the traction control
function prevents the drive wheels from spin-
ning excessive, thus helping the vehicle to
start moving from a stopped condition. It also
provides sufficient driving force and steering
performance as the vehicle turns while press-
ing the acceleration pedal.
N00559300051
The skid control function is designed to help
the driver maintain control of the vehicle on
slippery roads or during rapid steering
maneuvers. It works by controlling the engine
output and the brake on each wheel.
N00559400241
The ASC is automatically activated when the
ignition switch is turned to the “ON” position
or the operation mode is put in ON. You can
deactivate the system by pressing down the
“ASC OFF” switch for 3 seconds or longer.
When the ASC is deactivated, the dis-
play/indicator will turn on. To reactivate the
ASC, momentarily press the “ASC OFF”
switch ; the display/indicator is turned off.
Do not install any aftermarket limited slip
differential (LSD) on your vehicle. The ASC
may stop functioning properly.
An operation noise may be emitted from the
engine compartment in the following situa-
tions. The sound is associated with checking
the operations of the ASC. At this time, you
may feel a shock from the brake pedal if you
depress it. These do not indicate a malfunc-
tion.
• When the ignition switch is turned to the
“ON” position or the operation mode is put
in ON.
• When the vehicle is driven for a while after
the engine is turned on.
When the ASC is activated, you may feel a
vibration in the vehicle body or hear a whin-
ing sound from the engine compartment.
This indicates that the system is operating
normally. It does not indicate a malfunction.
When the anti-lock braking system warning
light is illuminated, the ASC is not active.
Traction control function
When driving a vehicle on a snowy or icy
road, be sure to install snow tires and drive
the vehicle at moderate speeds.
Skid control function
The skid control function operates at speeds
of about 9 mph (15 km/h) or higher.
ASC OFF switch
For safety reasons, the “ASC OFF” switch
should be operated when your vehicle is
stopped.
Be sure to keep the ASC on while driving in
normal circumstances.
Using the “ASC OFF” switch turns off both
the stability control function and the traction
control function.
BK0202700US.book 68 ページ ２０１３年３月２８日　木曜日　午前１１時５４分
… 131 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi Outlander Sport - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi Outlander Sport - 2014 in the language / languages: English as an attachment in your email.

The manual is 49,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info