617119
118
Zoom out
Zoom in
Previous page
1/384
Next page
Electronically controlled 4WD system (if so equipped)
Features and controls 5-55
5
To gain extra acceleration in “D” (DRIVE)
position (when passing another vehicle) push
the accelerator to the floor. The CVT will
automatically downshift.
For short waiting periods, such as at traffic
lights, the vehicle can be left in selector lever
position and held stationary with the service
brake.
For longer waiting periods with the engine
running, place the selector lever in the “N”
(NEUTRAL) position and apply the parking
brake, while holding the vehicle stationary
with the service brake.
Prior to moving off after having stopped the
vehicle, make sure that the selector lever is in
“D” (DRIVE) position or Sports mode posi-
tion.
To park the vehicle, first bring it to a com-
plete stop, fully engage the parking brake,
and then move the selector lever to the “P”
(PARK) position.
If the CVT does not shift while driving, or
your vehicle does not pick up enough speed
when starting on an uphill slope, it may be
that there is something unusual happening in
the transmission, causing a safety device to
activate. Have your vehicle checked at an
authorized Mitsubishi Motors dealer or a
repair facility of your choice as soon as possi-
ble.
N00517201165
The electronically controlled 4WD system is
an all-wheel drive system that allows one of
three drive modes to be selected with a
switch, in accordance with the driving condi-
tions.
The following drive modes are available.
Passing acceleration
In sports mode, downshifts do not take place
when the accelerator is depressed all the way
to the floor.
Waiting
To avoid transmission overheating, never try
to keep your vehicle stationary on a hill by
using the accelerator pedal. Always apply
the parking brake and/or service brake.
Do not rev the engine unnecessarily while
the vehicle is stationary. Unexpected acceler-
ation may occur if the selector lever is in a
position other than “P” (PARK) or “N”
(NEUTRAL).
Parking
When the CVT makes no speed
change
When the warning display and “SLOW
DOWN” or the warning display and
“SERVICE REQUIRED” appear on the
information screen in the multi-information
display, there could be a malfunction in the
CVT. Refer to “Continuously variable trans-
mission (CVT): Warning display” on page
5-51.
Electronically controlled
4WD system
(if so equipped)
Drive mode Function
2WD
This mode is for eco-
nomical driving on
normal dry roads and
freeways.
Driving in front-
wheel drive.
BK0202700US.book 55 ページ 2013年3月28日 木曜日 午前11時54分
118


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi Outlander Sport - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi Outlander Sport - 2014 in the language / languages: English as an attachment in your email.

The manual is 49,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info