599487
7
Zoom out
Zoom in
Previous page
1/15
Next page
7
MANUAL OPERATION (COOL, DRY, HEAT)
To select the COOL, DRY or HEAT mode:
1
Press the button.
2
Select the operation mode by pressing the button.
Each time this button is pressed, the operation mode is changed in sequence:
(AUTO) (COOL) (DRY) (HEAT)
To stop operation:
Press the button.
After the operation mode is set once, the operation starts in the same mode as
the one set previously from the next time by simply pressing the button.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
When the set temperature is to be changed:
Press the button to lower the temperature. One press lowers the temperature by about 1°C.
Press the button to raise the temperature. One press raises the temperature by about 1°C.
In COOL operation
When the outside temperature is low, the fan of the outdoor unit turns on and off frequently or decreases the rotation
speed to maintain sufficient cooling capacity.
In DRY operation
The temperature control (temperature setting) cannot be done.
The room temperature is slightly lowered in this operation mode.
The details of the display on the indoor unit are explained on page 6.
If the air conditioner doesnt cool or heat effectively
If the fan speed is set to Low or AUTO, sometimes the air conditioner may not cool or heat the air effectively. In this case,
change the fan speed to Med. or upper.
Change the fan speed.
Fan speed: Low or AUTO
Fan speed: Med. or upper
ON/OFF
ON/OFF
TOO
COOL
TOO
WARM
ON/OFF
AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT
To change the AIR FLOW velocity, press the button.
Each time the button is pressed, the fan speed is changed in sequence:
(Low) (Med.) (High) (Super High) (AUTO)
Use the (Super High) notch to cool/heat the room more efficiently.
If the operating sound of the air conditioner disturbs your sleep, use the
(Low) notch.
To change the AIR FLOW blowing direction vertically, press the
button.
Each time the button is pressed, the angle of the horizontal vane is changed in
sequence: (1) (2) (3) (4) (SWING) (AUTO)
SWING OPERATION
Use the swing operation for the air flow to reach all corners of the room.
Recommended horizontal vane range for more efficient air-conditioning
Use the (AUTO) position usually.
Use position (1) in the COOL or DRY mode and
use positions (2) to (4) in the HEAT mode when
adjusting to your requirements.
FAN
VANE
1
2
3
4
HEA
T
A
T
A
COOL
DR
Y
MODE
AIR FLOW velocity and direction can be selected as required.
SG79Y404H03 6/14/06, 10:14 AM7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi MSZ-GB50VA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi MSZ-GB50VA in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info