549864
54
Zoom out
Zoom in
Previous page
1/76
Next page
EN-54
Immediately after the power-on, during the lamp
selection, or during the lamp relay operation, you
cannot change the setting of LAMP SELECT and
LAMP RELAY.
In the case of continuous projection, the lamps may
deteriorate earlier unless they are turned off for 1
hour per week.
When using this projector continuously for a long
time of period, enable LAMP RELAY.
The brightness and color tint vary at the time of
lamp switching.
When LAMP SELECT is set to SINGLE:
The lamps are automatically switched and used alternately.
(See page 32 for menu setting.)
1. Display the INSTALLATION 1 menu.
2.
Select LAMP SELECT by pressing the or button.
1
2
LAMP SELECT
DUAL
3. Press the ENTER button.
4. Select SINGLE by pressing the or button.
LAMP SELECT
1
2
LAMP SELECT
SINGLE
5. Press the ENTER button.
6.
Select LAMP RELAY by pressing the or button.
LAMP RELAY
24H
7. Select 24H
or 1 WEEK
by pressing the or
button.
24H ......... The lamps are switched to each other
every day.
Off
Illuminating
LAMP 1
LAMP 2
1
2 3 4 5 6 7 8 (days)
At the time of power-on or menu setting
1 WEEK .. The lamps are switched to each other
every week.
LAMP 1
Illuminating
LAMP 2
1
2 3 4 5 6 7 8 (days)
Off
At the time of power-on or menu setting
8. Press the ENTER button.
When you select 24H or 1 WEEK , the box
to set the lamp relay interval is displayed.
24H
NEXT LAMP RELAY
24H
0
OK
CLEAR
DEL
CANCEL
12345678 9
Lamp relay (continued)
1 WEEK
NEXT LAMP RELAY
7D 00H
0
OK
CLEAR
DEL
CANCEL
12345678 9
9. Move the key cursor using the direction buttons to
select the number you want to enter and then press
the ENTER button.
• Maximum interval
24H ........... 24H (24 hours)
1 WEEK .... 7D 00H (7 days and 00 hours)
 key: Shifting the position of enter cursor
to the left for each character.
 key: Shifting the position of enter cursor
to the right for each character.
DEL key: Deleting the character in the
position of enter cursor for each
character.
CLEAR key: Deleting all the entered characters.
You can enter the value by pressing the number
buttons (0 to 9) while holding down the NUM
button on the remote control.
When the value you entered meets the following
conditions, an error dialog box is displayed at
the screen center.
The value has been cleared by DEL or CLEAR
and left blank.
The value you entered is out of the setting
range.
24H ......... 25H or over
1 WEEK ... 7D 01H or over
The value of each item is out of the setting
range.
D .................. 8 or over (1 WEEK only)
H .................. 25 or over
10. When selecting OK, the setting is completed as
the lamp-switching interval stored. However, when
selecting CANCEL, the setting is completed without
storing.
The display returns the LAMP RELAY menu after
selecting OK or CANCEL.
The setting you made is applied to NEXT LAMP
RELAY in the INFORMATION menu.
Important:
When you use the projector continuously, the lamp
relay may not be performed on time due to errors of
the clock function.
Immediately after the power-on, during the lamp
selection, or during the lamp relay operation, you
cannot change the setting of LAMP SELECT and
LAMP RELAY.
In the case of continuous projection, the lamps may
deteriorate earlier unless they are turned off for 1
hour per week.
When using this projector continuously for a long
time of period, enable LAMP RELAY.
The brightness and color tint vary at the time of
lamp switching.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi LU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi LU in the language / languages: English as an attachment in your email.

The manual is 10,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi LU

Mitsubishi LU User Manual - English - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info