617123
122
Zoom out
Zoom in
Previous page
1/434
Next page
Ignition switch
Features and controls 5-55
5
Engages the starter. After the engine starts,
release the key and it will return automati-
cally to the “ON” position.
N00539601097
After about 30 minutes has elapsed with the
ignition switch in the “ACC” position, the
function automatically cuts out the power for
the audio system and other electric devices
that can be operated with that position.
When the ignition switch is turned from the
“ACC” position, the power is supplied again
to those devices.
N00550900184
For vehicles with a manual transaxle, when
removing the key, push the key in at the
“ACC” position and keep it depressed until it
is turned to the “LOCK” position, and
remove.
For vehicles with a continuously variable
transmission (CVT) or Twin Clutch SST,
when removing the key, first set the selector
lever (CVT) or the gearshift lever (Twin
Clutch SST) to the “P” (PARK) position, and
then turn the key to the “LOCK” position and
remove it.
START
NOTE
Your vehicle is equipped with an electronic
immobilizer. To start the engine, the ID code
which the transponder inside the key sends
must match the one registered to the immobi-
lizer computer.
(Refer to “Electronic immobilizer” on page
5-4.)
ACC power auto-cutout func-
tion
NOTE
It is possible to modify functions as follows:
The time until the power cuts out can be
changed to about 60 minutes.
The ACC power auto-cutout function can
be deactivated.
For details, consult a Mitsubishi Motors
dealer.
To remove the key
NOTE
Manual transaxle
NOTE
For vehicles with a CVT or Twin Clutch
SST, the key cannot be removed unless the
selector lever (CVT) or the gearshift lever
(Twin Clutch SST) is set to the “P” (PARK)
position, which allows the ignition switch to
turn to the “LOCK” position.
CAUTION
Do not remove the ignition key from the
ignition switch while driving. The steering
wheel will lock, causing loss of control.
CVT or Twin Clutch SST
122


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi Lancer - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi Lancer - 2014 in the language / languages: English as an attachment in your email.

The manual is 60,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info