617123
97
Zoom out
Zoom in
Previous page
1/434
Next page
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
5-30 Features and controls
5
4. Insert the first valid F.A.S.T.-key into the
emergency key.
5. Turn the emergency key with the
F.A.S.T.-key to the “ON” position for 5
seconds.
6. Turn the emergency key with the
F.A.S.T.-key to the “LOCK” position.
Within 30 seconds after doing so, remove
the F.A.S.T.-key from the emergency key,
insert the second valid F.A.S.T.-key into
the emergency key and turn it to the “ON”
position. About 10 seconds later, the
immobilizer display will start to blink.
7. When the immobilizer display starts
blinking, turn the second valid F.A.S.T.-
key to the “LOCK” position and remove
it. Within 30 seconds after doing so, insert
a blank F.A.S.T.-key into the emergency
key and turn it to the “ON” position. Per-
form this operation no more than 30 sec-
onds after the immobilizer display starts
blinking. When registration of the ID
code is complete, the immobilizer display
will come on for 3 seconds then go off. If
an error occurs, the immobilizer display
will go off during the procedure.
8. If you wish to register another F.A.S.T.-
key, repeat the process from step 1.
N00515500141
Press the remote control transmitter buttons
to lock or unlock the doors and to open the
trunk lid.
It can also help you signal for attention by
setting off the panic alarm.
NOTE
Perform the operation when the interrupt dis-
play screen is not showing. The interrupt dis-
play screen may prevent you from seeing the
immobilizer display.
It is not possible to register a F.A.S.T.-key if:
the immobilizer display goes off during the
procedure
the immobilizer display does not come on
within 30 seconds after turning the ignition
switch to the “ON” position with a blank
F.A.S.T.-key
The procedure will be terminated automati-
cally if:
a period of 30 seconds or longer elapses
from the moment when the first F.A.S.T.-
key is turned to the “LOCK” position to the
moment when the second F.A.S.T.-key is
turned to the “ON” position
a period of 30 seconds or longer elapses
from the moment when the second
F.A.S.T.-key is turned to the “LOCK” posi-
tion to the moment when the blank
F.A.S.T.-key is turned to the “ON” position
To use the new remote control transmitters, it
is necessary to register the key with both the
electronic immobilizer and keyless entry sys-
tem.
Also refer to “Keyless entry system: Cus-
tomer F.A.S.T.-key programming” on page
5-33.
Keyless entry system
NOTE
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi Lancer - 2014 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi Lancer - 2014 in the language / languages: English as an attachment in your email.

The manual is 60,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info