Manual Mitsubishi Lancer - 2014 (page 77 of 434) (English)

617123

Zoom out

Zoom in

1/434

Keyless entry system (if so equipped)

5-10 Features and controls

1. Have available all (current and new)

remote control transmitters you wish to

2. With a valid (already registered) remote

control transmitter, press the UNLOCK

button (2) for 4 to 10 seconds. Then press

and hold the LOCK button (1).

3. Within 10 seconds of pressing the LOCK

button, release the LOCK and UNLOCK

buttons in sequence.

At this time, ID codes for all remote con-

trol transmitters except for the transmitter

used in steps 2 and 3 are erased and the

answerback function (door is locked and

unlocked) informs you that the registra-

tion mode has been activated.

4. Within 60 seconds after step 3, complete

the following ID code registration opera-

tion using the next remote control trans-

mitter you wish to register within 4

seconds.

i. Press both the LOCK and UNLOCK

buttons for 2 seconds.

ii. Release both the LOCK and UNLOCK

buttons for 1 second.

iii. Press the UNLOCK button.

The answerback function informs you

that the ID code registration of the

transmitter is completed.

5. To register the ID codes of additional

remote control transmitters, repeat step 4

within 60 seconds after step 4.

6. If no ID code of a remote control trans-

mitter is registered within 60 seconds

after step 4, the registration mode is can-

celed and the normal mode returns.

N00546101111

Your keyless entry system operates on a radio

frequency subject to Federal Communica-

tions Commission (FCC) Rules (For vehicles

sold in U.S.A.) and Industry Canada Rules

(For vehicles sold in Canada). This device

complies with Part 15 of FCC Rules and

Industry Canada licence-exempt RSS stan-

dard(s).

Operation is subject to the following two con-

ditions.

 This device may not cause harmful inter-

ference.

NOTE

 For verification purposes, try to lock and

unlock the doors after the registration is

completed.

 The indicator light (5) comes on each time a

button is pressed.

 The keyless entry system does not work if

the key is in the ignition switch.

 The remote control transmitter can be used

from about 40 feet (12 m) away. However,

this distance may change if your vehicle is

near a TV transmitting tower, a power sta-

tion, or a radio station.

 If the UNLOCK button (2) is pressed when

all doors are locked and no doors are opened

within about 30 seconds, the doors will auto-

matically re-lock.

 If the following conditions are observed after

pressing the buttons on the remote control

transmitter, the battery in the remote control

transmitter may need to be replaced.

• The doors cannot be locked or unlocked.

• The trunk lid cannot be opened.

• The panic alarm cannot be operated.

• The indicator light (5) is dim or does not

come on.

 If you lose your remote control transmitter,

please contact an authorized Mitsubishi

Motors dealer for a replacement.

 If you wish to obtain an additional remote

control transmitter, please contact an autho-

rized Mitsubishi Motors dealer. A maximum

of eight remote control transmitters can be

programmed for your vehicle.

 To use the new remote control transmitters, it

is necessary to register the key with both the

electronic immobilizer and keyless entry sys-

tem.

Also refer to “Electronic immobilizer (Anti-

theft starting system): Customer key pro-

gramming” on page 5-6.

General information

NOTE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi Lancer - 2014 in the language / languages: English as an attachment in your email.

The manual is 60,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mitsubishi Lancer - 2014 Manual

Product: