Manual Mitsubishi Lancer - 2014 (page 73 of 434) (English)

617123

Zoom out

Zoom in

1/434

Electronic immobilizer (Anti-theft starting system)

5-6 Features and controls

For you to register the ID code yourself, fol-

low the “Customer key programming” proce-

dure below.

If you choose to have your authorized Mit-

subishi Motors dealer register the ID code,

take your vehicle and all remaining keys to

your authorized Mitsubishi Motors dealer.

N00562201136

You can program new keys to the system if

you have two valid (already registered) keys

and blank (not registered) immobilizer key

(specially cut for your vehicle at your Mit-

subishi Motors dealer) by doing the follow-

ing:

1. Insert the first valid key into the ignition

switch and turn the key to the “ON” posi-

tion for 5 seconds.

2. Turn the key to the “LOCK” position and

remove the first key.

3. Within 30 seconds of turning the first key

to the “LOCK” position, insert the second

valid key into the ignition and turn it to

the “ON” position. About 10 seconds

later, the immobilizer display will start to

blink.

4. When the immobilizer display starts

blinking, turn the second valid key to the

“LOCK” position and remove it. Within

30 seconds after doing so, insert a blank

immobilizer key into the ignition switch

and turn it to the “ON” position. Perform

this operation no more than 30 seconds

after the immobilizer display starts blink-

ing. When registration of the ID code is

complete, the immobilizer display will

come on for 3 seconds then go off. If an

error occurs, the immobilizer display will

go off during the procedure.

5. If you wish to register another key, per-

form the process again from step 1.

Your electronic immobilizer operates on a

radio frequency subject to Federal Communi-

cations Commission (FCC) Rules (For vehi-

NOTE

 You are provided with two keys, but you

may register up to eight keys.

Customer key programming

(Except for vehicles sold in

Canada)

NOTE

 Perform the operation when the interrupt dis-

play screen is not showing. The interrupt dis-

play screen may prevent you from seeing the

immobilizer display.

 It is not possible to register a key if:

• the immobilizer display goes off during the

procedure

• the immobilizer display does not come on

within 30 seconds after turning the ignition

switch to the “ON” position with a blank

immobilizer key

 The procedure will be terminated automati-

cally if:

• a period of 30 seconds or longer elapses

from the moment when the first key is

turned to the “LOCK” position to the

moment when the second key is turned to

the “ON” position

• a period of 30 seconds or longer elapses

from the moment when the second key is

turned to the “LOCK” position to the

moment when the blank immobilizer key is

turned to the “ON” position

 To use the new remote control transmitters, it

is necessary to register the key with both the

electronic immobilizer and keyless entry sys-

tem.

Also refer to “Keyless entry system: Cus-

tomer remote control transmitter program-

ming” on page 5-9.

General information

NOTE

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi Lancer - 2014 in the language / languages: English as an attachment in your email.

The manual is 60,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Mitsubishi Lancer - 2014 Manual

Product: