475237

Mitsubishi L75-A81 Laservue Manual

31
Zoom out
Zoom in
Previous page
1/100
Next page
3. Using TV Features 29
In the U.S. call 1(877) 675-2224 for assistance.
To display 3D gaming or 3D cinema content, your
Mitsubishi LASERVUE
®
TV requires:
A compatible 3D source device•
Either checkerboard or Split HD format •
Active 3D glasses•
The TV’s 3D options are in the Adjust > 3D Mode menu
described on page 41.
Initial Setup
Check if your HDMI 3D video source device outputs
1.
a 1080p 60 Hz signal. This information will be
needed later when you assign an input name in the
New Device Found screen.
If your 3D glasses came with an emitter box,
2.
connect the emitter box to the
3D GLASSES
EMITTER
jack. Place the box in front of the TV
where there is a clear path to the glasses.
Note: If your glasses are marked DLP Link, skip this
step; no emitter box is required with DLP Link
technology.
1 2 3 4
HDMI
AVR AUDIO OUTPUT
DIGITAL
AUDIO
OUTPUT
RS-232C
3D
GLASSES
EMITTER
ANT
INPUT 2
INPUT 1
DVI/PC
L
R
L
R
INPUT
IR-
NetCommand
Output/External
Controller Input
Pb Pr
LR
Y/ VIDEO
3D
GLASSES
EMITTER
Power on the TV and the source device.
3.
Connect the source device to the TV’s HDMI input.
4.
When the
5.
New Device Found screen displays,
name the input according to the table below. Note
that the TV will process the video signal differently
depending on the name you assign. If your source
device is a Blu-ray disc or game console, the signal
must be 1080p at 60 Hz.
3D Video
Source
3D Video Signal
Assign
Name
Computer
Recommended: 1080p 60 Hz (1920
X 1080). The image will fill the TV
screen. Other 60-Hz computer video
signals compatible with the TV will
display with black bars. See page 17.
PC
Other
To see 3D video, the signal must be
1080p 60 Hz
Any other
name
Press
6.
BACK
to close the New Device Found screen.
Watching 3D Video
Note: Active 3D glasses are required.
Press
1.
ACTIVITY
.
Highlight the icon for the 3D video device and press
2.
ENTER
.
Press
3.
MENU
and select the Adjust > 3D Mode
menu.
Select
4.
On for 3D Mode. The On setting will be
memorized for the current input when you exit this
menu.
Select the source format.
5.
Checkerboard is the standard 3D format for •
DLP TV and is compatible with current PC 3D
gaming.
Top/Bottom may be used by some sources and •
can be identified by the screen being divided
into two images, one above the other.
Select the glasses control type
6.
.
For glasses with an emitter box, select • IR
Emitter.
For glasses marked • DLP Link, select DLP Link.
Press
7.
BACK
to close the menu.
If the image does not appear correct
8.
(e.g., objects
appear to be moving in instead of out),
open the
Adjust > 3D Mode menu and set Glasses L-R to
Reverse.
To Watch Regular (non-3D) Content
The 3D Mode setting is memorized for each input.
When you want to watch non-3D images on the input
selected above, open the Adjust > 3D Mode menu and
set 3D Mode to Off.
3D Video
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi L75-A81 Laservue at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi L75-A81 Laservue in the language / languages: English as an attachment in your email.

The manual is 11,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info