31038
52
Zoom out
Zoom in
Previous page
1/80
Next page
50
Timer Recording
Cancelling a Timer Recording before the Recording Starts
1 Press MENU on the remote control. Your VCR will turn on and VCR Main
Menu will appear on your screen. Turn the ADJUST dial on the remote control
to select Program to record. Turn the SHUTTLE ring to the right.
2 Recap screen will display for 4 seconds. While this screen is displayed, turn
the ADJUST dial to place the cursor next to the program you wish to cancel.
3 Press CANCEL. The program is erased.
4 Press MENU twice to turn off the menus.
Using a Satellite Receiver
If you are using a Mitsubishi, Panasonic, RCA, Sony, Toshiba, or Hughes satellite
receiver, your VCR will automatically turn the receiver on when a timer recording
begins and off when the recording ends.
However, if you are using a PRIMESTAR
®
or DISH Network
receiver, you will have
to turn the receiver on before a timer recording begins.
Before turning off the VCR, to put your VCR in stand-by for recording, make sure
that your satellite receiver’s menu turns off.
You can watch satellite channels through your VCR even when the VCR is turned
off but only if you connected your VCR and TV with an S-Video cable and the Rear
S-through in the S-VHS Set-Up menu is set to ON. If you used a standard video
cable, you can only view satellite channels through your VCR when the VCR is on.
TIMER RESET
You can use TIMER RESET on the rear panel to erase both the clock and all timer
recordings.
To use TIMER RESET, press it with a pencil or a ball point pen. The power will turn
off and the clock will be cleared. All timer recordings are erased.
If you have set the Clock set setting of the Set the clock menu to AUTO, the auto
clock function will automatically set the clock again.
Memory Backup
If the VCR is without power for 30 minutes or less, it will retain the clock and the
programmed settings. The VCR must have been plugged in for at least an hour
beforehand to charge this backup. If the power is lost for more than 30 minutes,
the time and the programmed settings will be lost.
If you have set the Clock set setting of the Set the clock menu to AUTO, the auto
clock function will automatically set the clock again when power is restored.
TIMER RESET
VCR Rear Panel
TIMER RESET
¬Program to record
CH DAY ON OFF
§ 2 MO12 11:30a 1:30pSP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
--- -- --:-- --:-- SP
ππππππππππππππππππππππππ
Use ADJUST to select,
and ENTER.
Press MENU to go back.
Recap screen
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HSHD2000U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HSHD2000U in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info