31038

Mitsubishi HSHD2000U Manual

28
Zoom out
Zoom in
Previous page
1/80
Next page
26
Your new VCR offers a wide variety of recording options that take full advantage of
our advanced electronics. First, you can learn how to record a current broadcast.
Then, in another section of this book called Timer Recording, you can learn how
to program your VCR to record at a later time and day.
Recording a Current Digital Broadcast
Recording a Current Digital Broadcast in D-VHS Format
1 Follow the steps 1 to 4 of Setting Up Your VCR to Playback/Recording the
Digital Broadcast in D-VHS Format on page 12.
2 Select the channel you would like to record on the integrated HDTV or the
IEEE 1394-equipped HDTV receiver, not on the VCR.
3 Load a D-VHS tape with its erasure prevention tab intact into the VCR.
4 Make sure that the D-VHS button on the front panel is lit. If not, press this
button until it lights up.
5 When you are connecting the integrated HDTV or the IEEE 1394-equipped
HDTV receiver which is capable of controlling the VCR:
Operate your TV or receiver to record, to pause recording or to stop recording.
Refer to the TV or receiver owner’s guide for this procedure. During your TV or
receiver is operating the HS-HD2000U, d will be displayed on the front panel
display.
When you are connecting the integrated HDTV or the IEEE 1394-equipped
HDTV receiver which is not capable of controlling the VCR:
Press IEEE 1394 INPUT on the VCR remote control to select the device you
would like to record from. d1 to d5 will appear on the front panel display.
Select the number that corresponds to the device from which you would like to
record. And then press REC on the remote control or on the front panel.
Recording will start. When the VCR reaches the end of the tape, it will automati-
cally rewind to the beginning of the tape and stop.
• You can stop recording at any time by pressing STOP or PAUSE on the remote
or on the front panel.
• To resume recording from STOP, press REC.
• To resume recording from PAUSE, press PAUSE.
You cannot use REC/˙REC LENGTH on the front panel to resume recording
from PAUSE.
IMPORTANT
Refer to your integrated HDTV or IEEE 1394-equipped HDTV receiver
owner’s guide.
The recording mode will be changed automatically depending on the
broadcasting signal.
While the VCR is recording a digital broadcast, please do not change the
channel on the integrated HDTV or the IEEE 1394-equipped HDTV receiver.
If you pause the VCR for more than five minutes, recording will stop
automatically to protect the tape.
If you pause a recording, a mosaic noise, a still or a black picture may
appear when playing where the recording is resumed.
If you attempt to record on a tape that has had its erasure prevention tab
removed, the VCR will eject it. To record over such a tape, simply place a
piece of vinyl tape over the opening.
Recording
REC
2 REC LENGTH
D-VHS
REC
STOP
STOP
IEEE 1394
INPUT
PAUSE
PAUSE
Erasure prevention tab
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HSHD2000U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HSHD2000U in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info