31038
11
Zoom out
Zoom in
Previous page
1/80
Next page
9
IMPORTANT
You cannot connect both a satellite receiver and a
digital cable box.
You may need to purchase an audio cable and an S-
video cable for this hookup.
If possible, you should have connected your VCR to
your TV with an S-Video cable. It will allow you to
watch the satellite video signal on your TV even
when the VCR is off if you set the Rear S-through in
the S-VHS Set-Up menu to ON.
If you connect your VCR to your TV with a standard
video cable, you will have to turn the VCR on to
watch the video signal from the satellite receiver.
You will be able to hear the audio signal from your
satellite receiver both when the VCR is on and off.
When you connect a satellite receiver to the S-video
input on the back of the VCR, you have to set the
Rear S-input in the S-VHS Set-Up menu to ON.
Refer to your Satellite Receiver Owner’s Guide for
Satellite dish to Satellite receiver connections, as
well as other possible video connections to your TV.
Connections to Satellite Receiver
If you have an Mitsubishi DSS
®
, RCA DSS
®
, Sony DSS
®
,
Toshiba DSS
®
, Panasonic DSS
®
, Hughes DSS
®
,
PRIMESTAR
®
, or DISH Network
satellite system, you
can connect the satellite receiver to your VCR and then
set up the VCR to change the channels of the satellite
receiver. This will allow you to program your VCR to
make unattended recordings from several different
satellite channels.
1 Connect the red and white audio cable to AUDIO
OUT R and AUDIO OUT L on the satellite receiver.
Connect the other end to the AUDIO IN R and AUDIO
IN L on the back of the VCR. Match the colors of the
connectors to the cables.
2 Connect the S-video cable to S-VIDEO OUTPUT on
the satellite receiver. Connect the other end to the S-
VIDEO IN on the back of the VCR.
If your satellite receiver does not have S-VIDEO
OUTPUT, connect the video cable to VIDEO
OUTPUT on the satellite receiver. Connect the other
end to the VIDEO IN on the back of the VCR.
3 See page 11 for IR Emitter connection.
connecting both a satellite receiver and a cable box
with audio video outputs
1 Connect the satellite receiver to the audio video
inputs on the back of the VCR as shown.
2 Connect the cable box to the audio video inputs on
the front of the VCR.
Hooking Up Your VCR
DSS
®
is a registered trademark of DirecTV, Inc.
PRIMESTAR
®
is a registered servicemark of PRIMESTAR Partners LP.
DISH Network
is a registered trademark of EchoStar Communications Corp.
S-VIDEO
VIDEO L RAUDIO
OUT
OUT
VIDEOAUDIOR
L/MONO
S-VIDEO
IN
1
R
L
R
L
White
Yellow
Yellow
Red
White Red
VCR Rear Panel
Satellite Receiver Rear Panel
optional audio cable
optional video cable
optional
S-video cable
Connect it only if the satellite
receiver does not have S-Video
Output.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HSHD2000U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HSHD2000U in the language / languages: English as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info