604759
30
Zoom out
Zoom in
Previous page
1/40
Next page
28
Control
3.0 [N] Supply temp. 2
Menu 3.1 [N] Offset heating/Tot 2
The heating curve offset 2 is selected here.
The total offset of heat curve 2 is also shown here. It includes
schedule, outer compensation and any room control.
Setting range: -10 – 10
Menu 3.2 [N] Heating curve 2
The selected heating curve is shown here. At value 0, the
function “Own heat curve 2” is activated, see menu 3.6.0.
Setting range: 0 – 20
Menu 3.3 [U] Min supply temp. 2
The set minimum level for the supply temperature for heating
system 2 is shown here.
The calculated flow temperature never drops below the set
level irrespective of the outdoor temperature, heating curve or
its offset.
Setting range: 10 – 65 °C
Menu 3.4 [U] Max supply temp. 2
The set maximum level for the supply temperature for heating
system 2 is shown here.
The calculated flow temperature never exceeds the set level
irrespective of the outdoor temperature, heating curve or its
offset.
Setting range: 10 – 65 °C
Menu 3.5 [U] External adjust. 2
Connecting an external contact, for example, a room thermostat
(accessory) or a timer allows you to temporarily or periodically
raise or lower the room temperature. When the external contact
is closed, the heating curve offset or the cooling curve offset is
changed by the number of steps shown here.
If room control is active there is a degree change to the set
room temperature.
Setting range: -10 – 10
Menu 3.6.0 [U] Own heating curve 2
Here you can select your own curve definition. This is an
individual linear curve with one break point. You select a break
point and the associated temperatures.
Note! The heating curve in menu 3.2 must be set to 0 to
activate this function.
Menu 3.6.1 [U] Supply temp.at +20
The supply temperature at an outdoor air temperature of
+20 °C is selected here.
Setting range: 0 – 80* °C
* Limited by menu 3.4 Max supply temp. 2.
Menu 3.6.2 [U] Supply temp.at -20
The supply temperature at an outdoor air temperature of -20 °C
is selected here.
Setting range: 0 – 80* °C
* Limited by menu 3.4 Max supply temp. 2.
Menu 3.6.3 [U] Buckling temperature
Here you select at what outside air temperature the break point
shall occur.
Setting range: -15 – 15 °C
Menu 3.6.4 [U] Supply t. at buckl
You set the calculated supply temperature for the break point
here.
Setting range: 0 – 80* °C
* Limited by menu 3.4 Max supply temp. 2.
Menu 3.6.5 [U] Return
Return to menu 3.6.0.
Menu 3.7 [U] Supply/Return temp 2
The present supply and return temperatures for heating system
2 are shown here. Return temperature is shown in brackets.
Menu 3.8 [N] Return
Return to menu 3.0.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HMS140VA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HMS140VA in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info