604756
21
Zoom out
Zoom in
Previous page
1/40
Next page
19
Alarm indications
Alarm indications
There are many monitoring functions integrated in Hydrolution.
To alert you to any malfunctions, the control computer
transmits alarm signals that can be read from the front panel
display.
What happens in the event of an alarm?
The background lighting in the display starts ashing and
the status lamp lights red.
Some alarms change operating mode to “Add. heat only.
and reduce the supply temperature to the minimum
permitted temperature to notify you that something is
wrong.
Resetting alarms
No harm in resetting an alarm. If the cause of the alarm remains,
the alarm recurs.
When an alarm has been triggered, it can be reset by switching
indoor unit off and on using the switch (SF1).
When the alarm cannot be reset using the switch (SF1), the
operating mode, Add. heat only, can be activated to
resume a normal temperature level in the house. This is
most easily carried out by holding the Operating mode”
button in for 7 seconds.
Different types of alarms
Al arms w it h auto ma tic re se t (do n ot n eed to b e
acknowledged when the cause has disappeared).
Existing alarms that require corrective action by you or the
installer.
Recommended actions
1. Read off which alarm has occurred from the heat pump’
s
display.
2. As a customer you can rectify certain alarms. See the table
below for relevant actions. If the alarm is not rectied, or is
not included in the table, turn off the switch
(SF1) to 0 and
contact your installer.
Check/remedy before installers/service
technicians are called
Alarm descriptionAlarm text on the display
Check that the thermostats for the radiators/
under-floor systems are not closed.
Tripped low pressure sensor.LP-ALARM
Check that the thermostats for the radiators/
under-floor systems are not closed.
Tripped high pressure sensor.HP-ALARM
Check that any circuit breakers to the outdoor
unit are not off.
Outdoor unit not powered / Communication
cut
OU power failure / OU Com. error
Check and replace any blown circuit and
main fuses.
Display not lit
Check that the circuit breaker to the indoor
unit is not off.
Check that the switch (SF1) is in normal posi-
tion (1).
NOTE
Recurring alarms mean that there is a fault in the
installation.
Contact your installer!
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HMA100VM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HMA100VM in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info