604756
14
Zoom out
Zoom in
Previous page
1/40
Next page
12
Readjusting the default settings
If the room temperature does not reach the target, readjustment
may be necessary.
Cold weather conditions
When the room temperature is too low, the “Heating curve”
value is increased in menu 2.1.2 by one increment.
When the room temperature is too high, the Heating
curve” value is decreased in menu 2.1.2 by one increment.
Warm weather conditions
If the room temperature is low, increase the “Heating curve
offset” setting by one step clockwise.
If the room temperature is high, reduce the “Heating curve
offset” setting by one step anti-clockwise.
Heating system 2
If the heating system has two different type of emitter like
radiator and under floor heating, it is possible to set two
different calculated supply temperature. System 1 for higher
supply temperature can be set in menu 2.1.0, and system 2 for
lower supply temperature can be set in menu 3.0.
Vacation set back
When you are away from home for a long time, it is possible to
set the target supply water temperature for heating lower than
usual to save energy consumption. Also, it is possible to cancel
hot water operation during the period.
For details, see menu 7.5.0 Vacation set back.
Silent mode
If you like to reduce noise from outdoor unit, it is possible to do
by reducing the compressor speed and fan speed in outdoor unit.
For details, see menu 7.6.0 Silent mode.
Comfort setting with room sensor
If MH-RG10 is installed, operation mode is chosen not only by
outdoor temperature but also by room temperature.
Upper limit of the outdoor temperature to operate in Heating
mode can be set in menu 8.2.3 Stop temp Heating.
Lower limit of the outdoor temperature to operate in Cooling
mode can be set in menu 8.2.4 Start temp Cooling.
Target room temperature can be adjusted by turning the knob
on MH-RG10, and it is displayed in menu 6.3.
For details, see instruction manual for MH-RG10. The below
gure shows an example of mode transition.
NOTE
Mode transition wouldn’t happen even if MH-RG10 is
installed in case Heating or Cooling mode is chosen.
Choose Auto or AutoC in case room sensor is used.
Stop temp
Heating (8.2.3)
Start temp
Cooling (8.2.4)
Target
room temp
(6.3)
Hot water production
Heating
Cooling
Room temperature
Mode transition (in case AutoC is chosen)
Outdoor temperature
LEK
Knob
MH-RG10
Comfort setting heating
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HMA100VM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HMA100VM in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info