604756

Mitsubishi HMA100VM Manual

10
Zoom out
Zoom in
Previous page
1/40
Next page
8
Front panel, indoor unit
Hot water symbol
“A”
“B”
Circulation pump symbol
Heating system symbol
Plus button
-
1.0
13.43
A BI II III I II
1.0
A
5 0 . 0 ° C
If the electrical addition is connected
Addition. heat symbol
“I” Electrical step 1
“II” Electrical step 2
“I II” Electrical step 1+2
“III” Electrical step 3
- Compressor is operational
Compressor symbol
“A” Heating mode
“B” Cooling mode
Button pressing (the change does not
need to be confirmed with the enter
button). - Current operating mode
shown in display - Further button press
changes operating mode. Press the
enter button to return to the normal
display mode.
Operating status
For information about the various operating
modes, see the different sections regarding
comfort settings.
Extra hot water operation starts with this
button. The operation is cancelled when
the button is pressed again.
The change does not need to be
confirmed with the Enter button.
Extra hot water (XHW)
Pressing the button takes you directly to
menu 1.0.
Menu 1.0
- Turning clockwise (+) offsets the Heating
Offset heating curve
Normal mode
Switch
1
All control functions connected.
Shutdown
0
Only the circulation pump and
electric heater (electrical step 2)
are operational.
Emergency mode
curve. When the knob is turned
menu 2.0 is shown on the display and
the value for the calculated supply
temperature changes.
For details, see Default Heating curve setting.
Hot water charging in progress.
Temporary Extra hot water operation in
progress.
Time based Extra hot water operation in
progress, e.g. periodic.
Circulation pump in operation.
With two circulation pumps (requires ESV
22 accessory), the operating pump is also
indicated.
Heating in progress.
Menu number
Key lock activated.
Description of current display
parameter
Information symbols
Plus button
Scroll forward in the menu system.
- Increase the value of the selected parameter
See the section “Control – General”
Minus button
- Scroll back in the menu system.
- Reduce the value of the selected parameter
See the section “Control – General”
Enter button
- Entering lower layer in the menu system.
- Parameter change activated
See the section “Control – General”
Status lamp
During normal operation, the status lamp
lights green. In the event of an alarm, it
lights red.
- Parameter change confirmed
Front panel, indoor unit
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HMA100VM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HMA100VM in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info