30512

Mitsubishi HD5000A Manual

9
Zoom out
Zoom in
Previous page
1/24
Next page
9
1394 Device Type Screen
(Figure ,)
If the new  device is also connected using analog
inputs, you will need to define the device type. Select the
type of device, such as a VCR.
Once the device type is selected, then the Device screen is
displayed so the manufacturer can be selected (see Figure
). If the manufacturer is listed, then you may be able to
control this device while it is operating as an analog VCR.
For example, if the IEEE  device you have added is a
Mitsubishi D-VHS VCR, and you have selected an analog
connection as a second connection, then you will select
Mitsubishi for the manufacturer.
Be sure to place an IR Emitter in front of the remote
control sensor, just as you have done for other
NetCommand® compatible traditional devices. It is
necessary to use the IR Emitter only when the D-VHS
VCR is being used as an S-VHS or VHS VCR. When
the D-VHS VCR is playing or recording digital signals in
D-VHS, the TV will control the VCR through the IEEE
1394 cable.
Adding IEEE 1394 Devices Automatically, continued
Connection Screen
(Figure )
The Connection Screen allows you to select which input
on the HDTV Receiver you used to connect the video
or S-Video cables and which TV or A/V Receiver input
you used to connect the stereo audio cables. Match the
input names for the TV Input and AVR Input selections.
If your A/V Receiver has other inputs than those listed
in the menu, those other inputs are not available for
NetCommand.
The playback and record control of some DV camcorders
may still operate by the IEEE  cable automatically,
even though you must use the video or S-video cable for
the picture. In this case, when you select the Camcorder,
be sure to select analog (not digital) from the pop up when
a camcorder is selected from the Device Selection menu.
Then the picture is shown via the analog connection but
control is from IEEE .
Figure 10. Connection Screen
Figure 9. VCR (Device Sample) Screen
Figure 8. 1394 Device Type Screen
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HD5000A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HD5000A in the language / languages: English as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info