549872

Mitsubishi HC8000D Manual

42
Zoom out
Zoom in
Previous page
1/55
Next page
EN-42
This projector is equipped with a lamp to project images. This lamp is a consumable. It may burn out or its brightness
may decrease during use. In such cases, replace the lamp with a new one as soon as possible. Be sure to replace the
lamp with a new lamp sold separately that is exclusive to this projector. Contact your dealer for purchase of the lamp.
Spare lamp VLT-HC7800LP
Warning:
• Becarefulnottodropthelampxingscrewsinsideoftheprojector.Don’tputametalpieceorammableobject
into the projector. Using the projector with any foreign object present inside may result in electric shock or fire.
When you can’t remove the foreign object from the inside, contact your dealer for removal.
• Donottouchthelampwithbarehandsorgiveashocktothelamp.Attachthelampproperly.Improperhandling
may cause explosion.
• Besuretoinstallthelampsecurely.Whenthelampisn’tinstalledproperly,itwon’tilluminate.Improperinstallation
may also result in fire.
• Don’tshaketheremovedlampordon’tliftitaboveyourface.Youreyesmaybeinjuredbyyingorfallingglass
fragments.
• Don’treplacethelampimmediatelyafterusebecausethelampcoverwillbeveryhot.Youmaygetburned.Turn
off the power using the POWER button. After the lamp goes out, wait about two minutes until the intake and
exhaust fans for cooling the lamp stop rotating. Then unplug the power cord, and wait at least one hour to allow
the lamp to cool down enough to the touch.
• Keepsmallpartssuchasscrewsoutofthereachofbabiesandchildren.Ifswallowed,thosepartscancause
suffocation. In case a baby or a child swallows them, see a doctor.
Interval of lamp replacement
The recommended interval of lamp replacement is about 5000 hours*
1
*
2
of consecutive use. Such interval differs
depending on the operating environment and may be shorter than 5000 hours*
1
*
2
. Decrease in luminescence and/or
color brightness indicates that the lamp needs to be replaced. When the lamp operation time exceeds 3750 hours*
1
,
theindicatorwillblinkalternatelybetweengreenandred(whilethelampislit;whenthelampisnotlit,theindicator
will be lit red only) and the lamp replacement message will appear on the screen for one minute everytime the lamp is
turned on. When the lamp has been used for about 4750 hours*
1
, the replacement message (LAMP REPLACEMENT)
will appear on the screen for one minute every 25 hours*
1
thereafter. When the lamp operation time exceeds 5000
hours*
1
*
2
, the projector automatically shuts off and can’t be used until the lamp is replaced and the lamp
operation time is reset.
*1: Duration when LAMP MODE of the INSTALLATION menu is set to LOW. When it is set to STANDARD, this duration will be
shorted.
*2: When LAMP MODE is set to STANDARD, this duration will be shorted to 3000 hours.
Caution:
• Don’tremovethelampforanypurposeotherthanreplacement.Unnecessaryremovalofthelampmayresultina
breakdown.
• Thisprojectorusesahigh-pressuremercurylampasthelightsource.Thehigh-pressuremercurylampmay
explode or fail to illuminate permanently because of an impact, scratch, or deterioration through use. The period
of time until explosion or permanent failure to illuminate varies considerably from lamp to lamp, depending on
operation conditions. Therefore, the lamp may explode soon after the start of use.
• Thepossibilityofexplosionofthelampincreasesifyouuseitbeyonditsreplacementperiod.Whentheinstruction
of lamp replacement appears, replace it with a new one immediately even if the lamp is still lighting normally.
• Whenthehigh-pressuremercurylampexplodes,glassfragmentswillscatterinsideoroutsidethelampboxand
the gas charged inside the lamp will diffuse inside or outside the projector. The gas inside the lamp contains
mercury. Be careful not to breathe it or avoid it from entering your eye or mouth. If you should breathe it or if it
should enter your eye or mouth, see a doctor immediately.
• Intheeventthatthehigh-pressuremercurylampexploded,glassfragmentsmayhavebeenscatteredinsidethe
projector. Ask your dealer to replace the lamp and to inspect the inside of the projector. When you clean or replace
the lamp by yourself, be sure to hold the handle of the lamp. You may get injured by glass fragments.
• Whenremovingthelampfromtheceiling-mountedprojector,usethelampreplacementattachmentpackedwith
the projector or option lamp to prevent glass fragments from scattering.
• Besuretousethelampexclusivetothisprojector,VLT-HC7800LP.Useofotherlampsmaycauseafailureofthe
projector.
Replacing the lamp
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HC8000D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HC8000D in the language / languages: English as an attachment in your email.

The manual is 7,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info