549872

Mitsubishi HC8000D Manual

12
Zoom out
Zoom in
Previous page
1/55
Next page
EN-12
Adjusting the position of the projected image
To adjust the position of the projected image on the screen, use the LENS SHIFT dial.
1. Rotate the LENS SHIFT dial inside the top cover of the projector to adjust the image position.
• Rotatingthedialclockwise(orcounterclockwiseforaceiling-mountprojector)movestheimageup.
• Rotatingthedialcounterclockwise(orclockwiseforaceiling-mountprojector)movestheimagedown.
• Becarefulnottobecaughtintheopeninginthelenswhilethelensismoving.
• Whilethelensshiftisworking,thescreenmayicker.
• Projectedimagesmaybecomedistorted,havedecreasedresolution,orhaveshadowsattheircornersiftheyare
positioned close to the top (or bottom in the case of a ceiling-mount projector).
Correcting skewed or distorted image
For the best projection, project images on a flat screen installed at 90 degrees
to the floor. If necessary, tilt the projector using the two adjustment feet on the
bottom of the projector.
1. Tilt up the projector to the appropriate angle.
2. Rotate the adjustment feet for fine adjustment.
Important:
• Don’ttransporttheprojectorwithitsadjustmentfeetextended.Otherwisethe
adjustment feet may be damaged.
When fine streaks are seen on projected images
This is due to interference with the screen surface and is not a malfunction. Replace the screen or displace the focus
a little. (See page 18 or 23 for focus adjustment.)
When projected images are distorted to a trapezoid
When the screen and the projector are not placed perpendicularly to each other, projected images become
trapezoidal. If you cannot make the projector and the screen perpendicular to each other by mechanical adjustments,
adjust keystone.
With the INSTALLATION menu:
(See page 29 for menu setting.)
1. Display the INSTALLATION menu.
2. Select KEYSTONE by pressing the p or q button.
3. Equalize the widths at the top and bottom of the screen by pressing the t or
u button, viewing the screen.
To cancel the menu:
4. Press the MENU button several times.
• Inthekeystoneadjustment,youcanobtainanoptimumresultwhentheLENSSHIFTdialisatthecenterposition.
• Whenthekeystoneadjustmentiscarriedout,theadjustmentvalueisindicated.Notethatthisvaluedoesn’tmean
a projection angle.
• Whenthekeystoneadjustmenttakeseffect,theresolutiondecreases.Inaddition,stripesmayappearorstraight
lines may bend in images with complicated patterns. They are not due to product malfunctions.
• Whenthekeystoneadjustmentiscarriedout,theimagemaynotbedisplayedcorrectlybecauseofthetypeof
input signal.
• Whenthekeystoneadjustmentisperformed,thedisplayedimagemaybedistorted.
• Depending on the installation conditions of the projector and the screen, a perfect rectangular image and the
proper aspect ratio may not be obtained.
• Whilea3Dimageisdisplayed,thekeystoneadjustmentisunavailable.
Setting up your projector (continued)
IMAGE
REVERSE
OFF
OFF
BACK COLOR
OFF
LOWLAMP MODE
AUTO POWER
ON
AUTO POWER
OFF
INSTALLATION
TRIGGER1(POWER)
OFF
TRIGGER2(ANAMO)
OFF
ON
ON
BLUE
SPLASH
SCREEN
TEST PATTERN
CROSS HATCH
KEYSTONE0
opt.
Press the
t
button.
Press the
u
button.
Adjustment feet
Screen
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HC8000D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HC8000D in the language / languages: English as an attachment in your email.

The manual is 7,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info