493620
32
Zoom out
Zoom in
Previous page
1/41
Next page
EN-32
Using filter
Filter cover
(a)
(a)
Holder
Holder
Filter cover
Filter
Filter cover
(a)
This projector has a filter cover (filter) for keeping dust out. When using the projector in a dusty place, attach this filter
cover.
Installation
Before installing this filter to the projector, be sure
to unplug the projector from the outlet.
1. Fit three hooks of the filter cover into the projector.
2. Push the filter cover in the direction of the arrow.
If you use excess force to push the filter cover,
the hooks may be damaged.
3. Tighten the attachment screw (a) firmly.
Cleaning
Warning:
Never use flammable air duster or other materials when cleaning the air-filter. Flammable substances may ignite
causing fire or breakdown when the lamp is illuminated.
Before cleaning, be sure to turn off the main power switch and unplug the projector from the outlet.
Clean the filter frequently (at least once a month). When dust accumulates on the filter at the air inlet, the
temperature inside the projector may rise abnormally high, causing damage to the internal parts and reducing the
lifetime of the panel.
In case of any abnormality including an abnormal rise of the inside temperature, the projector may automatically turn off
and go into the standby mode where the light source lamp is turned off in order to protect its internal parts.
Cleaning the filter
1. Remove the screw (a) from the filter cover.
Be careful not to lose the screw.
2. Move the filter cover in the direction of the arrow.
3. Release three hooks and remove the filter cover from
the projector.
If you use excess force to pull the filter cover, the
latches may be damaged.
4. Remove the holder that is retaining the filter while
pushing the tab of the holder in the direction of the
arrow.
5. Remove the filter from the filter cover.
6. Clean dirt and dust adhering to the filter using a
vacuum.
If stubborn stains persist, wash the filter with diluted
detergent, rinse with water, and dry well.
7. Attach the filter to the filter cover.
Make sure that the filter is positioned correctly.
8. Fit and push the holder as far as it will go and press it in
the direction of the arrow to install.
9. Fit three hooks of the filter cover into the projector.
10. Push the filter cover in the direction of the arrow.
If you use excess force to push the filter cover, the
hooks may be damaged.
11. Tighten the attachment screw (a) of the filter cover
firmly.
Don’t use any other filters than that designed for this projector.
If you are disturbed by the light emitted from the side of the projector, attach
the filter to block the light. Further, if you are disturbed by the light emitted
from the hole of theft-proof lock, place the supplied cap on the hole.
Cap
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi HC3100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi HC3100 in the language / languages: English as an attachment in your email.

The manual is 5,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info