587205
7
Zoom out
Zoom in
Previous page
1/22
Next page
6
1 Press TIMER button.
2 Press button once.
Æ
3 Press SET button.
[EXAMPLE] ” flashes,
” lights.
4 Press or button.
The display changes as below. Set as you like.
” ~
5 Press SET button.
Sleep timer has been set.
If the Sleep timer is set when the unit stops, it starts operating.
After “ is displayed in the display area, it returns to
step 2.
<When “Ten hours later OFF” is set >
(lights)
” (lights for two seconds)
È
(lights)
” (lights)
The time left is displayed by one hour as time passes off after the
setting.
When the setting time elapses, the unit stops operating.
The unit stops operating at each setting time once it is set.
6 Press ON/OFF button. The timer mode is
finished.
1 Press TIMER button.
2 Press button twice.
[ ]
Æ
[ ]
Æ
[ ]
3 Press SET button.
[EXAMPLE] ” flashes,
” lights.
4 Press or button.
Set the time at which you want to stop the operation.
Set “Hour”
If you press or button for a while, “Hour” display is changed
by one hour, and stops when you stop pressing.
Set “Minute”
If you press or button, the display increases or decreases
by ten minutes.
5 Press SET button.
OFF timer has been set.
After “ ” is displayed in the display area, it returns
to step 2.
<If set to 6:00 PM >
” (lights)
” (lights for two seconds)
”(lights)
” (lights)
The unit stops operating at 6:00 PM.
The time display is also turned off.
6 Press button. The timer mode is finished.
The unit stops operating at the setting time.
This setting is effective for only once.
If you start the operation while you are setting the OFF
timer, operate the air conditioner before setting of timer.
SLEEP TIMER MODE
OFF TIMER MODE
If you press button while timer mode
is operative, timer mode is canceled and the
display will return to the original display.
If you do not press any button for several minutes
after entering the timer mode, the timer mode
ends and returns to the original display.
NOTE
• If you press button while timer mode
is operative, timer mode is canceled and the
display will return to the original display.
If you do not press any button for several minutes
after entering the timer mode, the timer mode
ends and returns to the original display.
ATTENTION
After certain period has elapsed, the unit stops operating.
Sleep timer
The unit stops operating at each setting time once it is set.
NOTICE
HOW TO PERFORM THE TIMER OPERATION < WIRED REMOTE CONTROL >
1 Press TIMER button.
It enters the timer mode.
“Current day of the week” and “Current time” are displayed.
Display area : [
]
[
]
[
]
2 Press SET button.
The display area shows : [ ]
( flashes)
[
] (current time)
[
]
3 Press or button.
Align the mark above the day of the week to the current
day of the week.
Press and mark to move to the right and the left respectively.
If you press the RESET button, the remote control will return to
the previous screen and display “ ”.
4 Press SET button.
The day of the week is fixed, and the flashing of mark turns to
lighting stably.
“current time” is displayed by flashing in the ON timer display area,
and “ ” is displayed in the display area.
5 Press or button.
Set to the current time.
If you press the
RESET button, the remote controller return
to step 1.
6 Press SET button.
The flashing for time display turns to lighting stably, and
is displayed to show that the current time is set.
Two seconds later, it returns to step 1, and “ is
displayed.
7 Press button.
The timer mode is finished.
2 3 1
4 5
6
7
Timer operation is performed base on the time set by the steps described in this section. Make sure to set the
time to the current time correctly.
SETTING THE TIME
If you press button while timer mode is operative,
timer mode is canceled and the display will return to the
original display. Note that the setting which has not been
completed is canceled.
If you do not press any button for several minutes after
entering the timer mode, the timer mode ends and returns
to the original display.
ATTENTION
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi FDTW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi FDTW in the language / languages: English as an attachment in your email.

The manual is 10,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi FDTW

Mitsubishi FDTW User Manual - German - 22 pages

Mitsubishi FDTW User Manual - Dutch - pages

Mitsubishi FDTW User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info