587206
8
Zoom out
Zoom in
Previous page
1/22
Next page
7
Selection of Weekly timer mode
Up to four times of timer operation (ON timer/OFF timer) are available for each day of the week.
Note : Set time every month in Weekly timer mode.
1 Press TIMER button.
2 Press button for four times.
[ ]
Æ
[ ]
Æ
[ ]
Æ
[
]
Æ
[ ]
3 Press SET button.
”is displayed in the display area.
4 Press or button.
By pressing or button, it is possible to choose the item to set.
” (for setting the timer)
(for setting the selected day of the week to
holiday)
(for checking the timer setting and canceling
individual settings)
5 Press SET button.
The selected mode is fixed.
3
5
2•4 1
WEEKLY TIMER SETTING
1 In the Weekly timer mode, select
and press SET button confirm.
See step 1 to 5 in the above “Selection of Weekly timer mode”
( is flashing)
” is displayed in the display area.
2 Press or button.
Set the mark above the day of the week to the day to be set
for timer setting. Press and to move to the right and left
respectively, and will move flashing.
If you press the button when the ” marks are displayed on
from “MON” to “FRI”, and then “SUN” to “SAT” (every day) with
flash, this can be used to apply the same schedule on these days.
Press
RESET button to return to “selecting Weekly
timer mode screen”, and “
” is displayed.
See the above step 3.
3 Press SET button.
” mark above the day of the week is switched to light, and is fixed.
” is displayed as the left display.
4 Press or button.
Up to four schedules can be set for each day. Select the timer
schedule number you want to set. Set either ON timer or OFF
timer for each single operation. (See the left EXAMPLE ).
Press button to make the mark next to the number flash and
move downwards.
Press the button to move the mark upwards.
1
2
3
4
Press the
RESET button to return to step 1 display.
3•5•7•9•11•13
2•4•6•8•10
WEEKLY TIMER MODE
<In case Monday is set>
If you press button while timer mode
is operative, timer mode is canceled and the
display will return to the original display.
If you do not press any button for several minutes
after entering the timer mode, the timer mode
ends and returns to the original display.
ATTENTION
[EXAMPLE]
Number 1 :
Number 2 :
Number 3 :
Number 4 :
* Four operations can be set
with only ON timer or only OFF
timer.
HOW TO PERFORM THE TIMER OPERATION < WIRED REMOTE CONTROL >
1 Press TIMER button.
2 Press button for three times.
[ ]
Æ
[ ]
Æ
[ ]
Æ
[
]
3 Press SET button.
[EXAMPLE] ” flashes,
” lights.
4 Press or button.
Set the preferred time to start the operation
Set “Hour”
If you press or button for a while, “Hour” display is changed
by one hour, and stops when you stop pressing.
Set “Minute”
If you press or button, the display increases or decreases
by ten minutes.
5 Press SET button.
ON timer has been set.
The left display is displayed in the display area.
<If set to 10:00 AM >
” (lights)
” (lights)
If you press the
RESET button, the remote control will
return to the previous screen.
6 Press or button.
Press button and ” is displayed
Press button and ” is displayed
Select either of the above two.
Go to step 7 if temperature is set.
Go to step 9 if set temperature is not set.
7 Press SET button.
The left display is displayed in the display area.
<If set to 10:00 AM >
”(lights)
“27°C” (The current set temperature is displayed flashing)
” (lights)
8 Press or button to set temperature.
If you press or button, the display increases or
decreases by 1°C.
Set temperature at which you want to start the operation.
If you press the RESET button, the remote control will
return to the previous screen.
9 Press SET button.
ON timer is set, and after “ ” is displayed, it returns
to step 2.
<If set to 10:00 AM >
” “ ” (lights)
” (lights)
È
” “ ” (lights)
” (lights)
Set temperature is displayed only in case it is set.
The unit starts to operate at setting time with set temperature.
The time display is turned off.
10
Press button.
The timer mode is finished.
10
8
3 2 1
5 4
7 6
9
The unit starts to operate at the set time. It is possible to set temperature at which you want to start the operation.
One setting results in one operation only.
ON TIMER MODE
ON timer and either Sleep timer or OFF timer are
set together, the temperature of ON timer is not
displayed.
ON timer and either Sleep timer or OFF timer are
set together, OFF timer (or Sleep timer) shows
preference.
• If you press the button while timer
mode is operative, timer mode is canceled and
the display will return to the original display.
If you do not press any button for several
minutes after entering the timer mode, the timer
mode ends and returns to the original display.
ATTENTION
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi FDTQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi FDTQ in the language / languages: English as an attachment in your email.

The manual is 10,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi FDTQ

Mitsubishi FDTQ User Manual - German - 22 pages

Mitsubishi FDTQ User Manual - Dutch - pages

Mitsubishi FDTQ User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info