604739
9
Zoom out
Zoom in
Previous page
1/24
Next page
8
If you select a day of the week for which setting
have already been made, all the timer numbers
that have been set are displayed. And the details
of the timer setting for the number which has “
mark is displayed. You can modify the selected
setting by overwriting it.
If you set ON timer and OFF timer operating at
the same time, OFF timer will precede.
If the same two times are set for ON timer on the
same day, the lower number precedes.
Next setting and exiting Weekly timer mode
After “ is displayed, is displayed.
1 Press or button.
By pressing or button, it is possible to choose the item to set.
(select the next timer operation number
within the same day)
(select the next day)
” (Timer mode ends)
2 Press SET button.
If “ ” is selected, ” is displayed.
Repeat step 3 and the subsequent steps of Weekly timer setting
on page 7.
If “
” is selected, ” is displayed.
Repeat step 1 and the subsequent steps of Weekly timer setting
on page 7.
If “
” is selected, timer mode ends.
2 1
Display after Weekly timer modes setting
The day of the week set is underlined.
The mark is displayed above the current day of the week.
The display of all the timer operation numbers set for the
current day is turned on. The mark indicates the next
setting number to be activated, and the set time is displayed.
The timer operations are executed in order, and the number
and time display are turned off when all the timer operations
for the current day are completed.
If you press
button while timer
mode is under setting, timer mode is canceled
and the display will return to the original one.
If you do not press any button for several
minutes after entering the timer mode, the
timer mode ends and the display returns to
the original one.
NOTICE
HOW TO PERFORM THE TIMER OPERATION < WIRED REMOTE CONTROL >
5 Press SET button.
mark next to a number lights.
or “ is displayed.
The settings so far are effective and the display changes as shown
on the left.
6 Press or button.
Press button and is displayed.
Press button and is displayed.
Select either of the above two.
Press the
RESET button to return to the display in step 3.
7 Press SET button.
is displayed
8 Press or button.
Set the time.
Press the
RESET button to return to the display in step 5.
9 Press SET button.
When time display lights, the time is fixed.
In case of OFF timer setting, setting process is completed on
this step.
A “_” mark lights (
) under the day of the week which
you set and the display appears as the left image.
Proceed to “Next setting and Exiting Weekly timer Mode” on the
right page.
In case of ON timer setting,
is displayed,
proceed to step
10.
10
Press or button.
Select either “ or “ ”.
11
Press SET button.
In case has been selected, ON timer setting
process is completed.
A “_” mark lights (
) under the day of the week which
you set and the display appears as the left image.
Proceed to “Next setting and Exiting Weekly timer Mode” on the
right page.
In case
has been selected,
is displayed; Proceed to step 12.
12
Press the temperature setting buttons or
.
Press the or the button to increase or decrease by
1°C.
Set the temperature at the start of operation.
Press the reset button to return to the display ”.
13
Press SET button.
ON timer setting with start-up temperature has been
completed.
The value of the temperature stops flashing and lights.
A “_” mark lights (
) under the day of the week which
you set and the display appears as the left image.
Proceed to “Next setting and exiting Weekly timer mode” on the
right page.
<When “ ” is selected>
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi FDTC35VF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi FDTC35VF in the language / languages: English as an attachment in your email.

The manual is 9,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi FDTC35VF

Mitsubishi FDTC35VF User Manual - German - 24 pages

Mitsubishi FDTC35VF User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info