604738
7
Zoom out
Zoom in
Previous page
1/24
Next page
6
1 Press TIMER button.
2 Press button once.
3 Press SET button.
[EXAMPLE] ” flashes,
” lights.
4 Press or button.
The display changes as below. Set as you like.
” ~
5 Press SET button.
Sleep timer has been set.
The air conditioner will turn on if a sleep timer is set while it is
turned off.
After “
” is displayed in the display area, the display
in step 2 returns.
<When “Ten hours later OFF” is set >
(lights)
” (lights for two seconds)
(lights)
” (lights)
The remaining time is displayed, and changes in an hourly basis.
When the setting time elapses, the unit stops operating.
Every operation stops after a certain period of time has elapsed.
6 Press button. The timer mode is finished.
3•5 2•4 1
6
1 Press TIMER button.
2 Press button twice.
[ ]
[ ]
[ ]
3 Press SET button.
[EXAMPLE] ” flashes,
” lights.
4 Press or button.
Set the time at which you want to stop the operation.
Set “Hour”
If you press or button for a while, “Hour” display is changed
by one hour, and stops when you stop pressing.
Set “Minute”
If you press or button, the number in the display becomes
larger or smaller by ten minutes.
5 Press SET button.
OFF timer has been set.
After “ ” is displayed in the display area, the
display in step 2 returns.
<If set to 6:00 PM >
” (lights)
” (lights for two seconds)
”(lights)
” (lights)
The unit stops operating at 6:00 PM.
The time display is also turned off.
6 Press button. The timer mode is finished.
The unit stops operating at the setting time.
This setting is effective for only once.
3•5 2•4 1
6
Once the OFF timer is set, it is not possible to
start operation. If you would like to operate the
air conditioner, press ON/OFF button before
hand to turn on.
SLEEP TIMER MODE
OFF TIMER MODE
If you press button while timer mode
is under setting, timer mode is canceled and the
display will return to the original one.
If you do not press any button for several minutes
after entering the timer mode, the timer mode
ends and the display returns to the original one.
• If you press button while timer mode
is under setting, timer mode is canceled and the
display will return to the original one.
If you do not press any button for several minutes
after entering the timer mode, the timer mode
ends and the display returns to the original one.
ATTENTION
After a certain period of time has elapsed, operation
stops.
Sleep timer
The unit stops after the set time elapses.
NOTICE
HOW TO PERFORM THE TIMER OPERATION < WIRED REMOTE CONTROL >
1 Press TIMER button.
The mode changes to timer mode.
“Current day of the week” and “Current time” are displayed.
Display area : [
]
[ ]
[ ]
2 Press SET button.
The display area shows : [ ]
( flashes)
[
] (current time)
[
]
3 Press or button.
Place the mark above the day of the week to the current
day.
Press and mark to move to the right and the left respectively.
If you press the RESET button, the remote control will return to
the previous screen and display “ ”.
4 Press SET button.
The day of the week is fixed, and the flashing of mark stops
and lights.
The “current time” value flashes, and ” is displayed.
5 Press or button.
Set to the current time.
If you press the
RESET button, the display is returned to
the one in step
1.
6 Press SET button.
The flashing for time display stops and lights, and “
is displayed to show that the current time is set.
Two seconds later, the display in step 1 returns, and
” is displayed.
7 Press button.
The timer mode is finished.
2 3 1
4 5
6
7
Timer operation is performed based on the time of the clock which is set by the following steps. Make sure to
set the time to the current time correctly.
SETTING THE TIME
If you press button while timer mode is under
setting, timer mode is canceled and the display will return
to the original one. Note that the setting which has not been
completed is canceled.
If you do not press any button for several minutes after
entering the timer mode, the timer mode ends and the
display returns to the original one.
NOTICE
NOTICE
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mitsubishi FDTC25VF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mitsubishi FDTC25VF in the language / languages: English as an attachment in your email.

The manual is 9,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Mitsubishi FDTC25VF

Mitsubishi FDTC25VF User Manual - German - 24 pages

Mitsubishi FDTC25VF User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info